Door Reversibility; Building-In Instructions - Küppersbusch IKE 318-8 Gebrauchs- Und Montageanleitung

Door reversibility

The appliance is supplied with the door opening to
the right. For door opening in the opposite direction,
perform the following actions prior to installation
Warning! When changing the side at which
the door opens, the appliance may not be
connected to the mains. Remove plug from
the mains beforehand.
1. Unscrew the upper pin and remove the spacer.
2. Remove the door.
3. Unscrew with a key the lower pin and replace it on
the opposite side.
4. Reinsert the door, refit the spacer and rescrew the
upper pin on the opposite side.

Building-in instructions

Dimensions of housing
Height 1780 mm
Depth 550 mm
Width 560 mm
For safety reasons, minimum ventilation must be as
shown in Fig.
Attention: keep ventilation openings clear of
obstruction.
It is necessary that the niche is provided with a
conduct of ventilation having the following
dimensions:
Depth 50 mm
Width 540 mm
Drill the unit using a Ø 2.5 mm drill (10 mm max.
penetration);
Fix the square fitting (1) to the appliance
min.
50 mm
200 cm 2
D567
3
2
1
PR01
13mm
Ø 2,5
D740
min.
200 cm
2
19