Adjusting The Parquet/ Carpet Brush; Accessories; Adjusting The Suction Power - Beko VCO 62602 AB Bedienungsanleitung

3 Usage
3.5 Adjusting the parquet/
carpet brush
Perform the following actions on the adjustment
latch (10) located on the parquet/carpet brush (9);
• Vacuum on firm ground and parquet; extend the
brush before vacuuming.
• Vacuum on carpets and rugs; retract the brush
before vacuuming.
3.6 Operation
1. Plug in the appliance after pulling the power
plug located at the back of the appliance.
WARNING: Stop pulling the
appliance cable when it comes to
A
the yellow mark located on it. After
the yellow mark, the red mark will
come. Do not pull any more after
reaching the red mark.
2. Press the on/off button (1) to switch on your
appliance.

3.7 Adjusting the suction power

You can increase the suction power of the
appliance by turning the suction power
adjustment knob located on the body of the
appliance clockwise according to the type of the
surface to be cleaned. To decrease the suction
power, turn the suction power adjustment knob
anti-clockwise.
8 / EN
All manuals and user guides at all-guides.com

3.8 Accessories

Accessories have been designed in one piece to
save space and provide practical use.
Upholstery tool
1. Grasp it from the dust brush area and pull it
2. Attach the end of the handle or the telescopic
3. Pull the accessory to remove it when the
Dust brush
1. Grasp it from the dust brush area and pull it
2. Attach the end of the handle or the telescopic
3. Pull the accessory to remove it when the
backwards slowly.
– A click will be heard, indicating that the
button on the body has seated into its slot.
tube (11) to the inner side of the dust brush.
– You can now start vacuum cleaning.
process is complete.
backwards slowly.
– A click will be heard, indicating that the
button on the body has seated into its slot.
tube (11) to the inner side of the upholstery
tool.
– You can now start vacuum cleaning.
process is complete.
Vacuum Cleaner / User manual