Adjusting The Suction Power - Beko VCC34802AB Anleitung

3 Usage
3.6.1 Adjusting the suction
power
1. You can adjust the suction power using the
suction power adjustment knob (13) found
on the appliance. Rotating in the clockwise
direction will increase the suction power and
in counterclockwise direction will decrease the
suction power.
2. You can lower the suction power of the parquet
carpet brush by pulling backward the vacuum
adjustment control (2) located on the handle
(1) without the need to use the suction power
adjustment knob (13) found on the appliance.
3.6.2 Dust indicator
Dust indicator (11) indicates the fullness of the
dust bag. When the indicator displays red zone
more than 50%, replace the dust bag. (see 4.1).
3.7 Accessories
Upholstery tool
Suitable for cleaning the floorings,
stair steps, inside of the cars, sofas,
armchairs etc.
Dust brush
Suitable for cleaning the curtains,
and sensitive and fragile objects.
Vacuum Cleaner / User Manual
Crevice tool
Suitable for the cleaning of the
surfaces which are difficult to
clean, such as the areas remaining
under the sofas and furniture.
A
WARNING: Do not perform
cleaning tasks using the end part of
the handle (1).
3.8 Additional brushes
3.8.1 Parquet/Hard floor brush
(VCC34802AB)
The hard floor brush (16) was developed for use on
hard floors such as tile, ceramic, parquet, wooden
floors etc.
It prevents potential scratches while cleaning hard
floors thanks to its specially-developed soft hair.
3.8.2 Turbo brush (VCC34803AD)
The turbo brush (17) allows you to clear the hair
on carpets in a faster and more efficient way. Thus
you can even remove the hair -which is hard to
remove such as dog hair or cat hair- easily.
9 / EN