Dmx Operation; Functions In Dmx Mode - EuroLite LED SLS-30 COB UV Floor Bedienungsanleitung

DMX operation

Setting the number of DMX channels and the DMX starting address
For operation with a controller with DMX512 protocol, the device is equipped with 4 control channels.
However, it can also be switched to a mode with 1 or 2 channels if different functions are required. To be
able to operate the device with a DMX controller, the DMX starting address must be set for the first DMX
channel. The starting address depends upon which DMX controller is being used. Please refer to the
controller's documentation.
1 Press the MENU button so many times until Addr is indicated in the display. Confirm with the ENTER
button.
2 The display indicates 1 CH (1 DMX channel), 2 CH (2 DMX channels) or 4 CH (4 DMX channels). Use
the buttons UP and DOWN to select the desired number of DMX channels. Confirm with the ENTER
button.
3 Use the buttons UP and DOWN to select the desired DMX address. Confirm with the ENTER button
again.
4 A dot will flash when DMX signals are being received. If no control signals are available, the display will
be flashing.
Note: Please make sure that you do not have any overlapping channels in order to control each device
correctly and independently from any other fixture on the DMX chain. If several devices are addressed
similarly, they will work synchronically.

Functions in DMX mode

1-channel mode
Channel
CH 1
2-channel mode
Channel
CH 1
CH 2
4-channel mode
Channel
CH 1
CH 2
CH 3
CH 4 Preset programs
Function
Dimmer 000 – 255
Function
Dimmer 000 – 255
000 – 009
Strobe effect
010 – 255
Function
Dimmer 000 – 255
000 – 009
Strobe effect
010 – 255
Color intensity 000 – 255
000 – 009
010 – 039
040 – 069
070 – 099
100 – 129
130 – 159
160 – 189
190 – 255
Value Details
Brightness 0-100 %
Value Details
Dimmer 0-100 %
No function
Strobe effect with increasing speed
Value Details
Brightness 0-100 %
No function
Strobe effect with increasing speed
UV 0-100 %
No function
Automatic program 1
Automatic program 2
Automatic program 3
Automatic program 4
Sound-controlled program 1
Sound-controlled program 2
Sound-controlled program 3
24/28 00126035, Version 1.0