Key To Danger Warning Decals; Bead Breaking; Deciding From Which Side Of The Wheel The Tyre Must Be Demounted; Special Instructions - HPA-Faip M 424 Betriebs- Und Wartungsanleitung

WARNING
For technical characteristics, attention
notices, maintenance and all other infor-
mation regarding the air tank, refer to the
air tank user and maintenance manual
supplied with the machine documentation.

Key to danger warning decals.

BEAD BREAKING

ATTENTION
During this stage of operations noise levels
may be up to 85 dB(A). We recommend
that operators wear hearing protectors.
50
Risk of crushing.
Never place any part
of the body between
the bead breaker
shoe, the rim and the
rim support.
When securing the
rim on the table top,
never place your
hands between the
sliding clamp and the
rim.
NEVER stand behind
the machine
During lowering of
the mount/demount
head, never place
your hands between
the wheel and the
head.
Deciding from which side of
the wheel the tyre must be
demounted
Fig.9
A Narrow side - Side for mounting the tyre
B Rim channel
C Wheel
D Wider side - You cannot mount tyres
from this side
The two sides may be almost identical,
but only the narrow side serves for tyre
mounting and demounting
Identify the side for tyre mounting and make
sure that this side is facing upward when
you install the tyre on the table top (i.e.
facing toward the mount/demount head)
A
B
C

Special instructions

Alloy wheels
Some alloy wheels on the market have mini-
mal rim channels or are even completely
without rim channels (these wheels are not
DOT approved).
Fig.9a
A No rim channel
A
D
9
9a
M 424 - M 424 FS