Set Up Device; Transporting The Device - Seca 274 Bedienungsanleitung

4.3 Set up device

Air bubble
Spirit level
Foot screw
Thumbscrews

4.4 Transporting the device

50 •
1. Place the device on a flat, stable surface.
2. Align the device by turning the foot screws.
The air bubble in the spirit level must be precisely
positioned in the middle of the circle.
3. Tighten the thumbscrews in the direction of the
arrow.
The foot screws are secured against adjustment.
The device is equipped with two castors, which enable
it to be transported over short distances.
CAUTION!
Risk of injuries and damage to the device
The device must be tilted. The large overall
height of the device can result in injuries and
damage to the device.
− Ensure that there are no other persons in the
immediate vicinity.
− Ensure that there are no objects in the
immediate vicinity.
1. Tilt the device backwards until it can freely move on
the castors.
2. Transport the device to its new location.
3. Upright the device.