Seca 274 Bedienungsanleitung Seite 44

No. Control
Head slide
1
Keypad, head
2
slide
Frankfurt
3
measure
Display, head
4
slide
Battery
compartment,
5
head slide
6
7
8
Brake button
9
Spirit level
10
Casters
11
Foot screw
12
44 •
Control for determining height
Controls for performing length/height measurements and
for configuring the device
Pull-out ruler for aligning the head according to the so-
called "Frankfurt Horizontal".
Display element of the head slide for measured results
and for configuration
Designed to take battery pack with 4 type AA batteries
(mignon), 1.5 V
Start key, head slide:
Switch head slide on and off
Arrow key (hold/zero)
• During measuring
- Press briefly: activate Hold function
- Hold down: set zero point
• In the menu:
- Select submenu, select menu item
- Set value (press briefly: value is changed by 1, press
for longer time: value is changed until key is released)
Enter key (send/print):
• During measuring (if wireless network is set up)
- Press briefly: Send measured result to ready to
receive devices (multifunctional display, wireless
printer, PC with USB wireless module)
- Hold down: print out measured result (wireless
printer)
• In the menu:
- Confirm selected menu item
- Save set value
• Holds the head slide in position
• Pressed to move the head slide
Indicates whether the device is horizontal
2, for transporting scales over short distances
4 screws, for precise alignment of device
Function