Power Control; Energy Save; No Signal Off; No Operation Off - Pioneer PDP-435FDE Bedienungsanleitung

09 Basic Adjustment Settings

Power Control

Power Control provides convenient functions for power
saving.

Energy Save

Power consumption is saved by decreasing picture bright-
ness.
1
Press HOME MENU.
2
Select "Power Control" ( /
3
Select "Energy Save" ( /
4
Select "Save" or "Picture Off" ( /
Item
Standard
(factory default)
Save
Picture Off
5
Press HOME MENU to exit the menu.

No Signal off

The system will be automatically placed into the standby
mode if no signal is received for 15 minutes.
1
Press HOME MENU.
2
Select "Power Control" ( /
3
Select "No Signal off" ( /
4
Select "Enable" ( /
Item
Disable
(factory default) standby mode.
Enable
5
Press HOME MENU to exit the menu.
• Five minutes before the system is placed into the standby
mode, a message appears every minute.
• The system may not be placed into the standby mode when
noise signals are present at the Media Receiver after a TV
programme finishes.
34
En
then ENTER).
then ENTER).
then ENTER).
Description
Does not decrease picture brightness.
Decreases picture brightness to save
power.
Deactivates the screen to save power. To
restore the screen display, press any
button other than i +/i – and
e.
This setting is not memorised by the
system.
then ENTER).
then ENTER).
then ENTER).
Description
Does not place the system into the
Places the system into the standby mode if
no signal is received for 15 minutes.

No Operation off

The system will be automatically placed into the standby
mode when no operation is performed for three hours.
1
Press HOME MENU.
2
Select "Power Control" ( /
3
Select "No Operation off" ( /
4
Select "Enable" ( / then ENTER).
Item Description
Disable Does not place the system into the
(factory default) standby mode.
Enable Places the system into the standby mode if
no operation is performed for three hours.
5
Press HOME MENU to exit the menu.
• Five minutes before the system is placed into the standby
mode, a message appears every minute.
then ENTER).
then ENTER).