What If There Are Problems; Disposal; Technical Specifications - Beurer LR 210 Gebrauchsanweisung

10. What if there are problems?

Problem
The air cleaner will not switch on The housing cover is not correct-
Insufficient passage of air
Air cleaner is very loud

11. Disposal

For environmental reasons, do not dispose of the device in the household waste at the end of its useful life.
Dispose of the device at a suitable local collection or recycling point. Dispose of the device
in accordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment).
If you have any questions, please contact the local authorities responsible for waste disposal.

12. Technical specifications

Model
Mains voltage
Output
Dimensions (L x W x H)
Weight
Suitable for rooms
Volume
Permissible operating conditions
Protection class
Air flow rate
Cause
ly installed.
The three-layered filter is not cor-
rectly inserted.
The mains part plug is not
plugged in.
The filters are dirty
The air intake/air outlet is
blocked.
There is a foreign body in the air
intake/air outlet.
The filters are clogged.
The filters are not correctly in-
serted.
The air cleaner is positioned on
an uneven surface.
LR 210
See type plate on the device
60 W
275 x 175 x 308 mm
2.9 kg
10 m² (ANSI/AHAM AC-1 2015) - 26 m² (NRCC 54013-2011)
approx. 50 dB (Level 3)
+5°C to +40°C, ≤ 90% relative humidity (non-condensing)
Protection class II /
110 m /h
3
20
Solution
Ensure that the housing cover is
correctly installed.
Ensure that the three-layered fil-
ter is correctly inserted.
Plug the mains part plug into
a suitable socket.
Clean the filters (see "Mainte-
nance and storage" section).
Ensure that the air intake/air out-
let is not blocked.
Remove the foreign body from
the air intake/air outlet.
Clean the filters (see "Mainte-
nance and storage" section).
Insert the filters correctly.
Position the air cleaner on a level
surface.