Cleaning And Maintenance; Cleaning The Filter; Cleaning The Housing; Storage - Beurer LR 210 Gebrauchsanweisung

Inhaltsverzeichnis

Verfügbare Sprachen

If you wish to change the combi filter at specific personal intervals (e.g. every six months), there is a

sticker on the upper edge of the combi filter on which you can enter, for example, the date it was inser-

ted or changed.

8. Cleaning and maintenance

WARNING

Before cleaning, always ensure that the mains plug of the air cleaner has been properly

disconnected.

Regular cleaning of the filter (once a month) is a prerequisite for hygienic and fault-free operation.

• Clean the three-layered filter using the brush attachment of a vacuum cleaner. To carry out a thorough clean,

pull out the pre-filter and clean the activated carbon filter located behind it and the HEPA filter located at the

rear, also using the brush attachment from a vacuum cleaner. Then replace the pre-filter on the HEPA filter.

Activated carbon filter

IMPORTANT

The three-layered filter should be changed after 4320 operating hours (see "Filter change" section).

The three-layered filter cannot be washed.

Clean the housing of the air cleaner with a damp cloth (water or a mild cleaning solution). When cleaning, do

not use any solvents or other aggressive or abrasive cleaning agents, as the surface may become damaged.

If you do not plan to use the device for a long period of time, we recommend that you clean it and store it in

the original packaging in a dry environment, ensuring it is not weighed down by additional items.

Replacement parts and wearing parts are available from the corresponding service address (according to

the service address list). Please state the corresponding order number.

Designation

Pre-filter, combi filter (HEPA + activated carbon)

Front

HEPA filter H 13

Item number and/or order number

693.01

Rear

Inhaltsverzeichnis