What If There Are Problems; Technical Data - Beurer LA50 Gebrauchsanweisung

10� What if there are problems?
Problem
No mist is being
emitted from the
device
If you cannot find a solution to your problem here, contact our Customer Services.
11� Technical data
Product name
Mains voltage/frequency
Water tank capacity
Nominal power
Room size
How it works
Run time
Protection class
Weight
Dimensions
Cause
Mains adapter is not
plugged in.
There is not enough
water in the water tank.
There is too much water
in the water tank.
The outlet in the cover is
blocked.
Solution
Insert the mains adapter into a
suitable socket.
Fill the water tank up to the
"MAX" marking.
Pour away excess water from
the water tank until it only
reaches the "MAX" marking.
Check that the outlet in the
cover is not blocked.
LA 50
220–240 V AC / 50/60 Hz DC:24 V
100 ml
12 W
up to approx. 15 m
Ultrasonic atomiser
approx. 4-8 hours
IP50, protection against harmful quanti-
ties of dust, no protection against water.
LA 50: approx. 295 g
adapter: approx. 113 g
116 x 112 x 162 mm
21
2