Accessories And Replacement Parts; What To Do If There Are Problems; Disposal; Technical Specifications - Beurer LR 310 Gebrauchsanweisung

9. Accessories and replacement parts

Replacement parts and wearing parts are available from the corresponding service address (according to the
service address list). Please state the corresponding order number.
Designation
Pre-filter, combi filter (HEPA + activated carbon)

10. What to do if there are problems?

Problem
The air purifier will not
switch on
Insufficient passage of
air
Air cleaner is very loud

11. Disposal

For environmental reasons, do not dispose of the device in the household waste at the end of its
useful life. Dispose of the unit at a suitable local collection or recycling point. Dispose of the device in
accordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If you have any
questions, please contact the local authorities responsible for waste disposal.

12. Technical specifications

Model
Mains voltage
Output
Dimensions (L x W x H)
Weight when empty
UV light
Suitable for rooms
Volume
Permissible operating conditions
Protection class
Cause
The housing cover is not correctly in-
stalled.
The three-layered filter is not correct-
ly inserted.
The mains part plug is not plugged in. Plug the mains part plug into a suit-
The filters are dirty
The air intake/air outlet is blocked.
There is a foreign body in the air in-
take/air outlet.
The filters are clogged.
The filters are not correctly inserted.
The air purifier is positioned on an un-
even surface.
LR 310
See type plate on the device
50 W
388 x 145 x 428 mm
4.5 kg
Wave length 254 nm; service life approx. 20,000 hours
approx. 54 m
approx. 56 dB (Level 3)
+5°C to +40°C, ≤ 90% relative humidity (non-condensing)
Protection class II /
Item number and/or order number
693.02
Solution
Ensure that the housing cover is cor-
rectly installed.
Ensure that the three-layered filter is
correctly inserted.
able socket.
Clean the filters (see "Maintenance
and cleaning" section).
Ensure that the air intake/air outlet is
not blocked.
Remove the foreign body from the air
intake/air outlet.
Clean the filters (see "Maintenance
and cleaning" section).
Insert the filters correctly.
Position the air purifier on a level sur-
face.
2
21