Troubleshooting - Silvercrest SDR 1000 A1 Bedienungsanleitung

__GRA86100_B1.book Seite 104 Montag, 3. Dezember 2012 1:31 13
To replace the shaving foil:
1. Press both release buttons|3 and take off the shaving head|2.
2. The shaving foil|1 is located in a thin plastic frame. Push
this frame by the sides from the top downwards and out of
the shaving head.
3. Carefully slide the replacement shaving foil into the shaving
head|2 from below. The narrow sides of the plastic frame
must fit correctly into the grooves and click into position.
4. Click the shaving head|2 into position on the appliance.

10. Troubleshooting

If your appliance fails to function as required, please try this
checklist first. Perhaps there is only a minor problem and you can
solve it yourself.
DANGER of electrocution!
Do not attempt to repair the appliance yourself under
any circumstances.
Fault
• Is the appliance being supplied with
The LED|5 does not
• Check the connections.
glow while charging.
• Is the appliance fitted correctly into
104
GB
Possible causes/Action
power?
the charging stand|15?