Makita EB5300TH Originalbetriebsanleitung Seite 13

CAUTION:
Push the primer pump several times.
Make sure that the choke lever is open.
pull the starter handle slowly with your right hand untill
strongly.
Release the throttle trigger
2
1
Throttle trigger Stop control lever
Set the throttle lever to the low
speed position to reduce the engine speed. Then set
Throttle lever Stop switch
NOTICE:
Otherwise the engine may
be damaged by overheating.
When the environmental temperature is low and humid-
and the engine drives unsteadily (carburetor icing).
necessary.
Set the nub to the sun mark (warmer position).
Set the nub to the the snow mark (anti-icing position).
downwards.
1
2
-
13 ENGLISH
Remove the screw and pull out the anti-icing lever.
3
Anti-icing lever Screw Nub
Tighten the screw.
1
Shoulder strap
3
1
2
-