Assembly - Makita EB5300TH Originalbetriebsanleitung

ASSEMBLY

CAUTION:
CAUTION:
CAUTION:
tighten them with the hose band.
2
Swivel pipe Flexible pipe
Loosen and remove the clamp screw.
Clamp screw
on the control handle when attaching to the swivel pipe.
Install the control handle / handle assembly onto
the swivel pipe and tighten them with the clamp screw.
pipe. Attach the cable holder between the hose band
3
pipe and elbow with the hose band. Set the control
1 cable onto the cable holder, and close the cable holder.
Hose band
1
hose band.
the long/short pipe clockwise to lock it into place. Then
attach the blower nozzle with the long/short pipe. Turn
the blower nozzle clockwise to lock it into place.
9 ENGLISH
Control handle / handle assembly
1
3
Elbow Cable holder Hose band
1
Cable holder Control cable
Attach the long/short pipe to the swivel pipe. Turn
1
2
Clamp screw
2
2