Operation; Description Of The Appliance; Preparing The Appliance - Kärcher BP 2 Cistern Originalbetriebsanleitung

For safety reasons, we rec-

ommend that you operate the
appliance only via a earth-
leakage circuit breaker (max.
30 mA).
The electrical connection of

the system may only be per-
formed by a qualified electri-
cian. Please follow the re-
spective national regulations!
This appliance is not intended

for use by persons with limit-
ed physical, sensory or men-
tal capacities or lacking expe-
rience and/or skills, unless
such persons are accompa-
nied and supervised by a per-
son in charge of their safety
or they have received precise
instructions on the use of this
appliance and have under-
stood the resulting risks.
Children may only use this

appliance if they are over the
age of 8 and supervised by a
person in charge of their safe-
ty, or if they have received in-
structions on the use of this
appliance and have under-
stood the resulting risks.
Children must not play with

this appliance.
Supervise children to prevent

them from playing with the
appliance.
Cleaning and user mainte-

nance must not be performed
by children without supervi-
sion.
16

Description of the Appliance

1 Check valve (pre-assembled)
2 Handle
3 Power cord with plug
4 Connection G1 (33.3) internal
thread
5 Intake grille/ pre-filter
6 Float switch
7 Connection adapter for pumps G1
8 Hose connection pieces 1" and 3/4"
9 Hose clip
10 Holder float switch

Preparing the Appliance

Caution
Risk of injury or damage due to
toppling appliance.
Prior to every operation, place
the appliance on a level surface
and secure it against rolling
away.
Illustration
Connect garden hose or lifting tube:
When using a garden hose, screw

the connection adapter into the
connection piece.
Additional sealing is not required.
Screw a fitting hose connection

piece onto the connection adapter.
Attach the hose end to the hose

connection piece and secure it by
means of a hose clamp.
Tighten the hose clamp using a
ratchet (approx. 5 Nm).
Illustration
Push the holder for the float switch

into the handle bore until it locks in
place.
– 3
EN

Operation