Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1.Use the Treadmill: Insert the power plug properly and turn on the switch (in red color)
When the light is on, you will hear a beep sound, and then the screen will be light up.
2.Safety key introduction: The treadmill can only start when the safety key is put on the yellow area
of the console. Clip the safety key on clothes when using the treadmill to prevent accidents.
3.Remote control, operation for walking function: After the power is turned on, long press the
Start/Stop button on the remote control for around 7 seconds to perform a one-to-one pairing
connection (the continuous buzzer sounds indicates that the pairing is successful, and if there is no
continuous buzzer sound, it means the pairing is unsuccessful). After pairing successfully, the remote
control can be sed to control the walking machine remotely. And you can use it to start, and stop the
machine, or increase/decrease the speed.
4.Console operation instructions
Button Function
Start/Stop: When the treadmill is stopped, press the Start/Stop button to start the treadmill.
When the treadmill is running, press the Start/Stop button to stop the treadmill.
Program: In standby state, press this button to cycle the options of manual mode and automatic
programs. Manual mode is the default operating mode of the system.
Mode: In standby state, press this button to cycle the options of 3 different countdown operation modes:
Time countdown, Distance countdown and Calorie countdown.
Speed shortcut button: When the treadmill is running, press this button to change the speed into
3km/h, 6km/h, or 9km/h directly.
Speed+/Speed-: After the treadmill is started, press these buttons to adjust the speed. Press the button
to increase the speed, and press button to decrease the speed.
Display function
Time display: When the time indicator light is on, it displays the running time in manual mode or the
countdown time in countdown mode or programs.
Speed display: When the speed indicator light is on, it displays the current running speed value.
4. Using Instructions
6
1
19
Werbung
Inhaltsverzeichnis
