Display Function - Merax MS282991 Bedienungsanleitung

2. Program key:
In standby mode, pressing this key can cycle the options from manual mode to P1 to P12 automatic
programs. Manual mode is the system defaulting running mode.
3. Mode key:
In standby mode, pressing this key can cycle the options of 3 different countdown running mode: time
countdown running mode, distance countdown running mode and calorie countdown running mode.
4. Volume key
±
When connected with mobile phone, press "+" to turn the volume up and press "-" to turn the
volume down.
5. Speed ± key
Use these keys to adjust the speed of the treadmill, press "+" to increase the speed and "-" to decrease
the speed. Speed quick buttons on the handle grip can also be used to change the speed of the treadmill
(right side).

Display Function

1. Speed Display.
Display the current running speed value.
2. Time Display
Display the time of manual mode and the countdown time under automatic modes and programs.
3. Distance display
Display cumulative distance under manual mode and programs. Display the distance countdown in
automatic mode.
4. Calorie display
Display cumulative calorie under manual mode and programs. Display the calorie countdown in
automatic mode.
5. Heart rate display
Heart rate value will be shown when the signal is detected. This data is for reference only, it cannot
be considered as medical data.
3 Modes' par ameter setting
The initial setting of time countdown is 15 minutes. The initial setting of calorie countdown is 50 kcal.
The initial setting of distance countdown is 1.0 kilometers. Cycle order: time, distance and calorie.
26