Display Function - Merax MS282992 Bedienungsanleitung

3. Mode key
In standby mode, pressing this key can cycle the options of 3 different countdown running mode: time
countdown running mode, distance countdown running mode and calorie countdown running mode.
4. Volume key
±
When connected with mobile phone, press "+" to turn the volume up and press "-" to turn the
volume down.
5. Speed ± key
Use these keys to adjust the speed of the treadmill by 0.1Km/press, press "+" to increase the speed
and "-" to decrease the speed.
6.Speed quick buttons
When the treadmill is on, press these buttons to cycle the speed of 3/6/9 km/h. Speed quick buttons
on the handle grip can also be used to change the speed of the treadmill (right side).
7. Pre. And Next buttons
When play music, press these buttons to change the music files.

Display Function

1. Speed Display.
Display the current running speed value.
2. Time Display
Display the time of manual mode and the countdown time under automatic modes and programs.
3. Distance display
Display cumulative distance under manual mode and programs. Display the distance countdown in
automatic mode.
4. Calorie display
Display cumulative calorie under manual mode and programs. Display the calorie countdown in
automatic mode.
5. Heart rate display
Heart rate value will be shown when the signal is detected. This data is for reference only, it cannot
be considered as medical data.
3 Modes' parameter setting
The initial setting of time countdown is 15 minutes. The initial setting of calorie countdown is 50 kcal.
The initial setting of distance countdown is 1.0 kilometers. Cycle order: time, distance and calorie.
26