Technical Data; Before Starting The Equipment - EINHELL TE-DW 180 Originalbetriebsanleitung

4. Technical data

Voltage .................................. 230-240 V ~ 50 Hz
Power draw ............................................ 1300 W
Sanding surface ..................................Ø 180 mm
Idling speed .................................800-1750 min
Mounting spindle thread ............................. M14
Protection class: ............................................ II/
Weight: .......................................................3.0 kg
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L sound pressure level ........................ 97 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level ........................ 108 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Handle
Vibration emission value a
K uncertainty = 1.5 m/s
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
Anl_TE_DW_180_SPK9.indb 17 Anl_TE_DW_180_SPK9.indb 17
-1
= 13.32 m/s
2
h
2
- 17 -
GB
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.

5. Before starting the equipment

Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
Warning!
Always pull the power plug before making
adjustments to the equipment.
5.1 Dust extraction (Fig. 2 – 3 / item 13)
Note:
Connect your tool to an extraction unit or vacuum
cleaner. This will provide optimum extraction of
chips and dust.
Caution:
For health safety reasons it is imperative that you
use a dust extractor.
•
Connect the vacuum extraction adapter (13)
to the connection (a) and twist it counter-
clockwise to lock it. (See Fig. 2)
•
Connect a suitable vacuum cleaner (not sup-
plied) to the vacuum extraction adapter (13).
(See Fig. 3)
•
Open the valve (7) if the unit sucks itself too
hard onto the surface you are working on.
Caution:
For health safety reasons it is imperative that you
use a dust extractor.
25.09.2018 09:00:33 25.09.2018 09:00:33