Display Indication - geo-FENNEL FL 505HV-G Bedienungsanleitung

EN

DISPLAY INDICATION

A) Rotating speed indication
B) Indication slope value X axis
C) Indication slope value Y axis
D) Battery status indication
E) Channel selection indication remote control
F) Indication of remote control active / inactive
G) MANual function indication
H) VWS function indication
I) TILT function indication
F
OPERATION
Power on the instrument on with button
After powering on the instrument the display shows automatically:
- the battery status of the instrument
- the preparation of the TILT mode (the TILT LED is blinking slowly); if the instrument is not disturbed
within 30 sec, the TILT mode is active; (see also: TILT function)
- status SLOPE +00.000 %
- channel CH1 of the remote control; if a remote is active and can receive a signal the indication =
if no remote is active the indication is =
- WVS and MAN mode are not yet active; no display indication.
At the same time the self-levelling procedure starts.
If the self-levelling procedure is completed the laser starts rotating with 600 rmp.
ROTATING SPEED
Press the button to select the rotating speed: 1100, 600 or 300 rpm (after switching on the laser it auto-
matically rotates with 600 rpm).
32
I
H
MAN
G
F
.
A
E
B
C
D
;