Introduction; Device Description (Fig. 1); Scope Of Delivery (Fig. 2); Proper Use - Scheppach Eco Mix 120 Original Bedienungsanleitung

1. Introduction

MANUFACTURER:
scheppach
scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new tool brings you much enjoyment
and success.
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
• A breakdown of the electrical system that occurs
due to the non-compliance of the electric regu-
lations and VDE regulations 0100, DIN 57113 /
VDE0113.
We recommend:
Read through the complete text in the operating in-
structions before installing and commissioning the
device. The operating instructions are intended to
help the user to become familiar with the machine
and take advantage of its application possibilities in
accordance with the recommendations.
The operating instructions contain important informa-
tion on how to operate the machine safely, profes-
sionally and economically, how to avoid danger, cost-
ly repairs, reduce downtimes and how to increase
reliability and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regu-
lations that apply for the operation of the machine in
your country. Keep the operating instructions pack-
age with the machine at all times and store it in a
plastic cover to protect it from dirt and moisture. Read
the instruction manual each time before operating the
machine and carefully follow its information. The ma-
chine can only be operated by persons who were in-
structed concerning the operation of the machine and
who are informed about the associated dangers. The
minimum age requirement must be complied with.
In addition to the safety requirements in these oper-
ating instructions and your country's applicable regu-
lations, you should observe the generally recognized
technical rules concerning the operation of welding
machines.

2. Device description (Fig. 1)

1. Swivel wheel
2. Base frame
3. Transport wheels
4. Engine
5. Drum

3. Scope of delivery (Fig. 2)

a. Drum upper section
b. Locking washer
c. Engine
d. Bearing bracket
e. Drum lower section
f. Supporting stand, with wheel axle
g. Wheels
h. Instruktion Manual
i. Bag provided (Fig. 3)
j. Frame
k. Supporting stand
l. Swivel wheel
m. Mixer

4. Proper use

The machine may only be used in the intended man-
ner. Any use beyond this is improper. The user/opera-
tor, not the manufacturer, is responsible for damages
or injuries of any type resulting from this.
An element of the intended use is also the observan-
ce of the safety instructions, as well as the assembly
instructions and operating information in the opera-
ting manual. Persons who operate and maintain the
machine must be familiar with the manual and must
be informed about potential dangers.
In addition, the applicable accident prevention regula-
tions must be strictly observed.
Other general occupational health and safety-related
rules and regulations must be observed.
The liability of the manufacturer and resulting dama-
ges are excluded in the event of modifications of the
machine.
• The concrete mixer is only intended for private use
in the home and garden.
• It may only be operated within the conditions of the
technical data.
• The concrete mixer is intended exclusively to pro-
duce concrete and mortar.
• Relevant accident prevention regulations and ot-
her generally recognized safety and technical rules
must also be observed.
www.scheppach.com
GB | 17