Pattfield Ergo Tools PA-900BS Originalbetriebsanleitung Seite 70

All manuals and user guides at all-guides.com
MACHINE SPECIFIC SAFETY WARNINGS
FOR SANDERS
a) Hold power tool by insulated gripping
surfaces, because the belt may contact
its own cord. Cutting a "live" wire may
make exposed metal parts of the power tool
"live" and could give the operator an electric
shock.
b) Use the machine only for dry sanding.
Penetration of water into the machine in-
creases the risk of an electric shock.
c) Always wait until the machine has come
to a complete stop before placing it
down. The tool insert can jam and lead to
loss of control over the power tool.
d) Pay attention that no persons are put at
risk through sparking. Remove any com-
bustible materials in the vicinity. Spark-
ing occurs when sanding metal materials.
e) Caution, fire hazard! Avoid overheat-
ing the object being sanded as well as
the sander. Always empty the dust bag
before taking breaks. In unfavourable
conditions, e.g., when sparks emit from
sanding metals, sanding debris in the dust
bag, micro filter or paper sack (or in the fil-
ter sack or filter of the vacuum cleaner) can
self-ignite. Particularly when mixed with re-
mainders of varnish, poly-urethane or other
chemical materials and when the sanding
debris is hot after long periods of working.
f) When working with the machine, always
hold it firmly with both hands and pro-
vide for a secure stance. The power tool
is guided more secure with both hands.
g) Secure the workpiece. A workpiece
clamped with clamping devices or in a vice
is held more secure than by hand.
h) Do not touch and/or inhale harmful/
toxic dust generated during sanding. All
persons in the vicinity of the work area
must wear appropriate personal protec-
tive equipment for protection against
harmful/toxic dusts. Use the dust extrac-
tion facility and keep the work area well
ventilated.
i) Ensure that you have removed foreign ob-
jects such as nails and screws from the
workpiece before commencing sanding.
68 EN
j) Do not force sander, let the tool do the
work at a reasonable speed. Overloading
will occur if too much pressure is applied
and the motor slows resulting in inefficient
sanding and possible damage to the sander
motor.
k) Don't continue to use worn, torn or heav-
ily clogged sanding belts.
l) Don't touch the moving sanding belt.