Intended Use; Specifications Supplied; Description Of Parts; Technical Data - Parkside PAS 1500 LM A1 Bedienungs- Und Sicherheitshinweise

z Intended use
This floodlight is suitable for rugged use
indoors and outdoors. The floodlight is not
intended for use as a hand-held lamp. The
handle is intended for moving the position of
the floodlight. The floodlight must not be
connected to the power supply while it is
being moved. The lamp can withstand
extremely high levels of physical stress in the
form of shocks (1 m²/s³, 200 - 2,000 Hz).
This product is intended for use in private
households only. Any type of use other than
that described above or any modification of
the product is prohibited and likely to cause
damage. The manufacturer accepts no
liability whatsoever for damage of any kind
resulting from use of the product other than
as intended. The product is not intended for
commercial use. The product is not suitable
for general indoor lighting in the home.
z Specifications supplied
1 work floodlight
1 tripod stand
(telescopic pole and tripod base)
1 instruction manual
z Description of parts
Handle
1
Floodlight
2
LED module
3
Telescopic pole
4
Tripod stand
5
Tripod base
6
Cable hook
7
Hand screw (tripod base)
8
Hand screw (telescopic pole)
9
Mains power cable
10
Mounting clamp
11
Folding bracket
12
Hand screw (folding bracket)
13
ON/OFF switch
14
z Technical data
Power supply
220-240 V AC, 50 Hz
voltage:
LED module
Light source:
(non-user replaceable)
Power
20 W
consumption:
1,500 lm with diffusor,
Luminous power:
2,000 lm without diffusor
Colour
6,500 K (cold white)
temperature:
Max. stand height: 1.54 m
IP65 (proof against
Protection rating
sprayed water)
Protection class: I
Cable length: 5 m
LED service life: approx. 30,000 h
Beam width: approx. 90°
Max. projection
40 cm²
area:
Colour
RA > 80
reproduction:
Minimum tilt angle
50°
(floodlight):
27.5 x 23 x 6.5 cm
Dimensions: (height including stand
1.54 m)
Model number: 1006-AS
GB/IE/NI/CY/MT
43