Basic Settings - Bosch WBE 4230 Originalbetriebsanleitung

11.2

Basic settings

i
Basic settings which can only be made following consultation with or by customer service.
1. Press and hold the <MENU> key.
2. and press the <OPERATOR> key within 1.5 seconds.
"
appears in the left-hand display and the current setting in the right-hand display.
P0t
Left Right Setting
display display
Activation and deactivation of
P0t on
electronic vernier caliper
oFF
Locking of electronic vernier caliper for
ALU on
attachment of adhesive weights
oFF
Storage of balancing position in ALU and
FLA on
PAX programs by way of pedal or time
oFF
Activation and deactivation of
PLr on
electronic gauge arm
oFF
Switch-on and switch-off of
ILL 0M
light and laser function
0FF
Activates or deactivates the brake to lock
brA 0M
the flange and wheel in position.
0FF
Robert Bosch GmbH
Settings | WBE 4230 | 47
Description
on = Electronic storage of rim data determined with vernier
caliper
oFF = Rim data must be entered manually
on = Locking of vernier caliper at balancing position
oFF = No locking of vernier caliper at balancing position
on = Setting of pedal not possible, always select oFF
oFF = Storage after 1 second
on = Electronic storage of the rim width
measured with the gauge arm
oFF = Rim width must be entered manually
0M =
Lighting of rim area on transfer of rim data and positioning of
adhesive weight
The laser beam indicates the attachment position for the balan-
ce weights (inner balancing plane only)
0M = Activation
0FF = Deactivation
en
|
1 695 656 347 2011-03-18