Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2: GENERAL OPERATION
|
|
press the RECALL button. The LED memory number display
will stop flashing and the selected effect will be engaged...
SC
Rev2Hal
|
27
Program Name
Mid-Band Drive
Heavy Metal
[1]
| 26 |
2
| 27 |
3 | Punk dist
| 28 | Rev4 Vocal |
| 10 | Overdrive Hall | 35 | Delay Shore
| .
|
_11 | Distortion Room | 36 | Delay Long — |
12 | мері.
|| 37 | Echo Shor |
[19 | ER Distortion || 38 | Echolong
| .
14 | Side Gate
| 39 | Stereo Flange |
Rev
2 Hall
[15 | Slow Gate Dist. | 40 | Chorus
|
7
|
16 | Reverse Dist. | 41 | Stereo Phasing |
|
_17 | Delay Dis.
|] 42 | Symphonie _ |
18 | Dist Fiter
|43 | Gate
Reverb |
19 | Double Dist. || 44 | Reverse Gate |
_20 | Max-Delay
Dist. | 45 | Compressor
| 21 | Flange Dist. |468 | Reva Gate |
[22 | Chorus Dist. |47) Pina
|
23 | Phase Dist
| 48 |PtenB
|
| 24 | Symphonic Dist. | 49 | Pitch C
25 | ReviHal
| 50 | Parametric EQ |
A complete description of each effect program and its parame-
ters is given іп "3: DESCRIPTIONS OF THE EFFECT PRO-
GRAMS & THEIR PARAMETERS" ON PAGE 13. Locations 51
through 00 are READ/WRITE MEMORY which can be used to
store your own edited versions of the preset programs.
SELECTING AN EFFECT/MEMORY
LOCATION
|
Ф Press the MEMORY button to engage the memory selection
mode. This is not necessary if the memory selection mode
is already active, but it's a good habit to get into to ensure
smooth operation.
Selected Effect
Distortion
Room
© Press the[A] ог [V] button to increment or decrement the
memory
location number shown on the LED display. Hold
‚ either of these buttons down for continuous incrementing or
decrementing. The name
of the program corresponding to
the currently selected memory
location will be shown on the
LCD, or "seek NO DATA >
" will be displayed if a mem-
ory location between 51 and 00 is selected into which an
edited effect program has not been stored. Note that at this
СЕР50 GUITAR EFFECT PROCESSOR
Werbung
