Yamaha GEP5O Bedienungsanleitung Seite 7

THE CONNECTOR PANEL
. CAUTION ТО REDUCE THE RISK OF ELECTRIC SHOCK. ОО NOT REMOVE COVER @
PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE
L. FOOT Қа ATTENTION AF им DE AÉDHNRE LE RISQUE
BYP. MEMORY ОЕ CHOG ELEC GTRQUE, Mi PAS огч LE Codinus
А LINTI жет,
AUCUNE PEGE К POUVANT ETRE б N
REPAREE PAR L'USAGER.
Ee Pera UN REPARATEUR
YAMAHA GUITAR EFFECT PROCESSOR
YAMAHA CORPORATION
© MIDI IN Connector
MIDI signals from external MIDI devices can be fed to this
terminal to remotely select effects, set the pitch shift of the
. PITCH CHANGE A effect, and trigger some other effects.
9 MIDI THRU Connector.
The MIDI THRU connector simply re-transmits any data re-
ceived at the MIDI IN connector, permitting convenient
"chaining" of MIDI devices.
9 BYPASS FOOT SW Jack
An optional YAMAHA FC5 footswitch or equivalent con-
nected to this jack can be used for foot control of the
BYPASS function:
O MEMORY FOOT SW Jack
An optional Yamaha FC5 footswitch or equivalent can be
used to sequentially select any group of effects from the 100
available memory locations, permitting a sequence of effects
to be set up to match the flow of a live performance.
ОВ & L OUTPUT Jacks
These two monaural 1/4" phone jacks deliver the stereo out-
put signal from the GEP50 to subsequent amplification or
mixing equipment. These jacks can be connected directly to
the inputs of guitar amplifiers, keyboard amplifiers, recording
equipment or mixing consoles. Since many of the СЕР50
effects are true stereo effects, we recommend connecting
both output jacks to the corresponding inputs of a stereo or
two-channel sound: system in order to get the best possible
sound. If this is not possible, connect either of the OUTPUT
jacks (L or R) to the amplification equipment used,
© INSERT ІМ and OUT Jacks
The INSERT IN and OUT jacks allow connection of a second
signal processor to the GEP50 which can be activated or by-
passed by using. the INSERT button.
9 INPUT Jack
The rear-panel INPUT jack duplicates the function of the
front-panel INPUT jack. Either — but not both — can be
used to receive the signal from your instrument or other
audio signal source. The front-panel INPUT jack takes prior-
ity, so if sources are plugged into both the front- and rear-
panel INPUTS, , опу the front-panel INPUT will be active.