Yamaha GEP5O Bedienungsanleitung Seite 26

m Bank Selection and MIDI Channel Programming
Ф Press the UTILITY button until the MIDI CONTROL function
appears (MIDI CONTROL is the second function on the
UTILITY "list"). |
© Select the bank to program using the [A] and [V]buttons.
® Press the STORE button to move the cursor to the channel
(ch) parameter.
Ф Use the [5] and [V] buttons to set the receive MIDI channel
(1 — 16), the OMNI mode (all channels can be received),
or turn MIDI reception OFF for the selected bank.
(5 Press the MEMORY button to return to the BANK parame-
ter if you wish to select a different bank for programming.
| =
UTILITY
MIDI CONTROL
BANK:A ch- 1
MIDI CONTROL
BANK:B ch-
Selected bank
MIDI CONTROL
BANK:B ch-
MIDI CONTROL
ВАМК:В ch= 16
MIDI channel number
27 СЕР50 GUITAR EFFECT PROCESSOR
ш Assigning Effects to MIDI Program Change Num-
bers
(D Press the UTILITY button until the MIDI PROG CHANGE
function appears (MIDI PROG CHANGE is the third func-
tion on the UTILITY "list").
© Use ће [A] and [V] buttons to select the program change
number to which a new GEP50 memory location number
is to be assigned. The range of available program change -
numbers is from 1 to 128.
® Press the STORE button to move the cursor to the MEM
(memory number) parameter.
@ Use the [^] and [v] buttons to select the memory location
number containing the effect which is to be assigned to
the currently selected program change number.
® Press the MEMORY button to return the cursor to the PGM
(program number) parameter in order to select a new pro-
gram change number for effect assignment.
==
UTILITY
MIDI PROG CHANGE
PGM MEM
MIDI PROG CHANGE
PGM 3- MEM
PGM number
MIDI PROG CHANGE
PGM 3= МЕМ 3
MIDI PROG CHANGE
PGM 3= MEM 32
MEM number