Werbung
Verfügbare Sprachen
Verfügbare Sprachen
NOTE:
The program number/memory number assignments
made are stored in the BANK selected in the previous
MIDI CONTROL function. To program the program.
change/memory number assignments for a different
BANK, return to the MIDI CONTROL mode, select the
desired BANK, then program the required assignments.
F.SW MEMORY НСІ.
51 TO
70
RANGE
If, for example, the RANGE parameter is set to "51 TO 70" as
shown in the LCD illustration above, each time the footswitch is
pressed the next highest memory location will be selected until
the last number in the specified range is reached. After the last
number in the specified range, the first (lowest) number is se-
lected and the process repeated. Reverse sequences can be
programmed by entering the highest number in the range be-
fore the lowest, as shown below.
E
Ж
F.SW
MEMORY
RCL
RANGE
54TO
51
In this case the selection sequence is: 54 > 53 >52 > 513
54, etc.
28
Werbung
