Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION INSTRUCTIONS ROBOT & AUTO STATION
AUTO STATION
1 Lay the auto station on the at ground over 5cm away from the wall, insert
the power plug into the socket, meeting the requirements, and connect the
power supply.
2 Ensure that there are no obstacles within 1.5m in front of the auto station
and 0.5m on both sides.
> 0.5m
> 0.5m
> 1.5m
PAIRING ROBOT AND AUTO STATION
1 Power connect on the auto station
2 Press and hold ON/OFF & Partial Cleaning buttons on Robot for 5 sec
3 Press and hold Start/Pause & Recall buttons on the auto station for 5 sec
4 1 min later pairing done, devices will exit the pairing mode
5 After pairing success, can put the Robot onto the auto station for
recharging
NOTE:
This pairing step is only necessary if a new robot or automatic station is exchanged.
For the complete set in the first purchase, it is already paired.
WARNING:
· Put the product in a place out of reach of infants, young children, and pets and do not
use it in any room where any infant, young children or pet is.
· To enable the robot to go back to the cleaning auto station smoothly after cleaning,
please clean the main body and the cleaning auto station in sequence while not
moving the cleaning auto station.
· The cleaning auto station can realize dust collection, charging, and mop washing and
air drying. It has been provided with a new dust bag before delivery.
· Do not use the mopping function on any carpet.
EN
Recharge button
ON/OFF button
Partial cleaning
button
9
Werbung
