Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6. CLEANING SETTINGS
MORE OPTIONS
Timer*
Set a timer to program the robot to clean at a certain time or day.
Manual
Control the robot manually with the remote control or use the Bluebot app on your
phone as a remote control.
Find robot
Tap this button when you lost your robot and your robot will tell you where it is.
Map management*
Use this function to manage your maps (5 max.).
Auto Boost*
Auto Boost will increase suction power when the robot gets more friction. This is
designed to increase suction on carpets.
Avoid Rug/Carpet*
This option will make sure the robot avoids rugs or carpet. Especially interesting to
use when using the mopping function. The carpet detection sensor will detect the
carpet and restrict the robot from going further.
Custom mode*
So the robot can remember per area what route to use for cleaning.
Auto Station control*
Here you can select the washing time of the mop (6-9-12min), water temperature
mode, drying mode (silent vs. rapid) and dust collection setting.
Note: Silent drying will take longer as the wind speed is slower and therefore more
quiet.
Auto station information*
This will show you on whih version the auto station is running.
18
Record | Cleaning history*
View all your previous vacuum cleaning records. You can see how many m2 has been
cleaned and the time it took. Here you can also load previously saved maps. Ideal
when cleaning different area's (upper floor for instance).
Voice and volume
Set up your language for the voice commands given by the robot and change the
volume of the voice.
Do not disturb mode
Here you can schedule a do not disturb time period.
Consumables and Maintenance*
Here you will find an overview of consumables and indicates when consumables
need to be replaced or maintenance is required.
More info*
Here you will find network and robot information.
Edit room*
Edit rooms in the map by create zones you will frequently use (e.g. split dining area
from kitchen area).
Mop drying
Fast mop drying or normal mop drying: fast 120 min (3 cycles), normal 240 min
(9 cycles)
Suction level
Control the suction power level and choose 'Quiet' , 'Standard' , 'Max' or 'Turbo Max' .
This will also influence the noise level of the suction of the robot.
Set wall / Resctricted Area*
Use this function to create no-go zones within the area that you are cleaning. You can
draw virtual walls that blocks the robot from crossing. Or you create a restricted area
for either vacuuming or mopping, this is done via area setting in the map overview.
* Via Bluebot app only
Werbung
