Werbung
Verfügbare Sprachen
Verfügbare Sprachen
MAINTENANCE
MOPPING MODULE CLEANING
1 Dismount the mopping module from the robot and remove the mop
from the mop holder.
2 Clean the mop with clean water, have it dried in the sun before
continued use, in order to avoid a bad smell due to dust caking.
3 The mopping holders/pads have a magnet in place to stay in position.
This may attract small metal parts from the ground while mopping,
these eventually will erode. So make sure to clean those regularly too by
removing the small metal parts and dry the pads completely.
24
CLEANING PARTS OF THE AUTO STATION
1 Open the auto station's top cover, dismount the dirty water tank, open
the dirty water tank release buckle, clean the dirty water tank with the long
cleaning brush, have it dried in the air and and place it back in the auto
station.
2 Dismount the tray base, clean it with the cleaning brush and mount it
again to the auto station.
Tray
Dirty water
tank release
buckle
Werbung
