Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION INSTRUCTIONS ROBOT & AUTO STATION
INSTALLATION OF MOPPING MODULE
1 Put the cleaning auto station horizontally in a proper position.
2 Dismantle the clean water tank and its lid, pour water into it
(make sure that the water level is below the "MAX" scale mark).
3 Reassemble the tank and top cover on the cleaning auto
station in the sequence.
NOTES FOR MOPPING MODULE
· Advice is not to use the mopping function on the carpet. You may
select the function 'Avoid rug' / 'Avoid carpet' in the Bluebot app.
· Please do not move or turn the robot during mopping, otherwise,
it could fail in its positioning, lose its map and "forget" the
forbidden areas that are programmed.
Water inlet
MAX scale mark
· Please don't use any detergent in the watertank to prevent
clogging.
· The robot cannot be used to remove liquids.
EN
11
Werbung
