Blaupunkt BLUEBOT OMEGA Bedienungsanleitung Seite 21

MAINTENANCE
ROLLING BRUSH | REGULAR CLEANING
1 Turn over the robot gently (watch out for the laser head) and press the
buckle on the rolling brush cover to take out the rolling brush.
2 Remove dust outside and inside the rolling brush using a tiny brush and
clean the rolling brush. You may use the knife of the cleaning brush to
remove hairs. Also make sure to clean the spots where the rolling brush is
positioned in the robot.
3 Reassemble the rolling brush and press the rolling brush and the rolling
brush cover tightly to completely close it again.
SIDE BRUSH | REGULAR CLEANING
1 Turn over the robot gently (watch out for the laser head), remove the
screws with help of a screwdriver and dismount the side brushes.
2 Remove hair and dirt and reassemble the side brushes.
EN
21