Hendi 148105 Bedienungsanleitung Seite 9

Assembly
• Remove all protective plastic foil
• Fasten the frame with the already assembled
wheels to the under part of the Power grill. Use
• Assemble the body frame the wheel frame. Take
note, the supplied rings has to be positioned in
the inner side of the frame and also where the
• Fasten the U-shaped part to the under part of the
body frame. Use the star bolt supplied. Check if
it's really tightened.
Warranty
Any defect affecting the functionality of the ap-
pliance which becomes apparent within one year
after purchase will be repaired by free repair or re-
placement provided the appliance has been used
and maintained in accordance with the instructions
and has not been abused or misused in any way.
Your statutory rights are not affected. If the appli-
ance is claimed under warranty, state where and
Discarding & Environment
When decommissioning the appliance, the prod-
uct must not be disposed of with other household
waste. Instead, it is your responsibility to dispose to
your waste equipment by handing it over to a des-
ignated collection point. Failure to follow this rule
may be penalized in accordance with applicable
regulations on waste disposal. The separate col-
lection and recycling of your waste equipment at
the time of disposal will help conserve natural re-
the parts delivered; M6x40 bolts and the M6 cap
nuts. Take note of the frame stand, the bend in this
frame has to be slightly bent upwards at the ends.
two frames join together. Use the long M6 x 65
bolts and the M6 cap nuts.
• Put the barbecue in up right position. The bar-
becue has to be positioned horizontally. If not
the wheel frame has to be turned the other way
round.
when it was purchased and include proof of pur-
chase (e.g. receipt).
In line with our policy of continuous product devel-
opment we reserve the right to change the product,
packaging and documentation specifications with-
out notice.
sources and ensure that it is recycled in a manner
that protects human health and the environment.
For more information about where you can drop off
your waste for recycling, please contact your local
waste collection company. The manufacturers and
importers do not take responsibility for recycling,
treatment and ecological disposal, either directly
or through a public system.
EN
9