Control Functions - Cameo FLAT PRO INDOOR PAR CAN Bedienungsanleitung

INTRODUCTION:
18 x 10 W 5-in-1 LED RGBWA FLAT PAR PROJECTOR
CLPFLATPRO18

CONTROL FUNCTIONS:

• 2-channel, 3-channel 1, 3-channel 2, 5-channel and 8-channel DMX control
• Red, green, blue, white and amber controllable separately
FEATURES:
• 18 X 10 W 5-in-1 LEDs
• RGB colour spectrum + white + amber
• 30° beam angle
• Refresh rate 3000 Hz
• Silent operation thanks to convection cooling
• Power consumption 125 W
• Operating voltage 110 V - 240 V AC
Neutrik powerCON input and output
• 3-pin and 5-pin DMX connectors
• Lit multifunctional LC display
• Adjustable multi-functional mounting bracket
• Music control via built-in microphone
• Master/slave mode
• Colour change rate and stroboscope effect controllable via control panel and DMX
OPERATION:
The Cameo FLAT PRO projectors are DMX-512 controllable, and are characterised by highly efficient, bright
LEDs. The intensity of the five colour groups (red, green, blue, white, amber) can be controlled independently
of one another, thus permitting an unlimited number of different colours. The Cameo LED projectors can can be
used both individually and in master/slave mode, with music control, and via DMX-512 protocol.
The integrated stand/bracket offers a secure hold when using the projector as a free-standing unit, or for the
assembly on trusses.
NOTE: Overhead installation may only be carried out by trained personnel. The projector must be
secured with an appropriate safety cable to prevent falling.
7