Ventilation And Installation; Electric Shock; Ventilation - Pkm IN4-SH Bedienungsanleitung

L (mm) W (mm)
590 520

Ventilation and installation

DANGER!
professional only. Do not carry out the installation yourself. RISK OF

ELECTRIC SHOCK!

Ventilation

M
INIMUM DISTANCES REQUIRED FOR PROPER VENTILATION
The induction hob must be ventilated properly. The air inlet (D) and outlet
(E) must never be blocked or covered. Always keep the appliance in proper
condition. The top closing edge of the cabinet (X) must not be flush with the
installation opening (1). Install the closing edge in offset positioning (2) or bevel
the closing edge (3). S. fig. below.
H (mm)
60
The induction hob must be installed by a qualified
D (mm) A (mm)
56 560
~ ~
61
1 =
SEAL
B (mm) X (mm)
490 mind.50