Product Description; A.) Rotary Control (4; Scope Of Delivery - VOLTCRAFT VC880 Bedienungsanleitung

5. PRODUCT DESCRIPTION

The multimeter (referred to as DMM in the following) indicates measured values on a digital display. The measured
value display of the DMM comprises 40000 counts (count = smallest display value).
If the DMM is not operated for approx. 15 minutes, the device switches off automatically. This saves battery power
and extends the period of operation. Automatic switching off is deactivated when the interface is switched on.
The meter can be used for do-it-yourself or for professional applications up to CAT IV.
For better readability, the DMM can also be optimally mounted with the standing bracket on the rear.
The battery and fuse compartment can only be opened after all measuring lines were removed from the meter. When
the battery and fuse compartment is opened, the measuring lines cannot be inserted into the measuring jacks. This
improves user safety.
In the voltage and current measurement area, a warning sound and a flashing "WARNING!" signal is used to
announce incorrectly connected measuring lines. Connect the measuring lines correctly before measuring.

a.) Rotary control (4)

The individual measuring functions are selected via a rotary control.
The automatic range selection "AUTO" is active for some measuring
functions. The appropriate range of measurement is set individually
for each application. Always start current measurements at the high-
est measurement range (10 A) and switch down to lower ranges if
necessary.
If the multimeter switch is set to "OFF", the meter is switched off.
Always turn the device off when it is not in use. The figure shows the
measuring function layout.

6. SCOPE OF DELIVERY

· Multimeter with rubber protection frame
· 9V block battery
· Safety measuring cables
· Operating instructions
41