Starting Of A Cleaning Programme - Pkm GSP12-6E Bedienungsanleitung

P
ROGRAMME
I
NTENSIVE
ECO*
90 .
MIN
R
APID

6.2 Starting of a cleaning programme

1. Open the door of the appliance.
2. Pull the dish racks out of the appliance.
3. Load the lower dish rack first and then the upper one.
4. Pour the dishwasher detergent and the water softener (=dishwasher salt) in the
relevant containers: s. chapter 4.1 W
seq. / chapter 4.2 R
seq.
5. Close the door properly.
6. Open the tap! During operation, the appliance must be supplied with water (full
water pressure).
7. Switch on the appliance using the « O
THE CONTROL PANEL
8. Press the « P
programme: I
NTENSIVE
programme indicator of the set cleaning programme goes on.
9. Press the corresponding button(s) to select an additional programme function (s.
chapter 6.2.1 S
10. Press the « S
TART
11. The programme starts after approx. 10 seconds.
12. The operational status indicator of the appliance goes on.
A
VAILABLE ADDITIONAL PROGRAMME FUNCTIONS
 « D
ELAYED PROGRAMME START
 « H
ALF LOAD
 « C
HILD SAFETY LOCK
 « D
ELAYED PROGRAMME START
 « H
ALF LOAD
 « C
HILD SAFETY LOCK
 « D
ELAYED PROGRAMME START
 « H
ALF LOAD
 « C
HILD SAFETY LOCK
 « D
ELAYED PROGRAMME START
 « C
HILD SAFETY LOCK
et seq. and chapter 4.3 D
INSE AID
:
OPERATING BUTTONS AND INDICATORS
» -
ROGRAMME BUTTON
- U
NIVERSAL
ELECTION OF AN ADDITIONAL PROGRAMME FUNCTION
/ S » -
TOP BUTTON
»
»
»
»
»
»
»
ATER SOFTENER
/ O » -
N FF BUTTON
repeatedly to set a desired cleaning
- ECO - G
LASS
to start the set cleaning programme.
~ ~
119
»
»
»
»
(=
DISHWASHER SALT
ISHWASHER DETERGENT
(s. chapter 3.2 V
).
- 90 M . - R
IN APID
.
) et
et
IEW OF
. The