About This Document; Safety Information; Status Indicators - SICK M4000 Montageanleitung

MOUNTING INSTRUCTIONS
1

About this document

2

Safety information

en
3 Sender and receiver
4

Status indicators

14 M O U N T I N G I N S T R U C T I O N S | M4000
All rights reserved. Subject to change without notice.
This document applies to the following products:
• M4000 Standard A/P
• M4000 Standard
• M4000 Advanced
• M4000 Advanced A/P
• M4000 Area 60/80
•
M4000 Standard Curtain
•
M4000 Advanced Curtain
Symbols and document conventions
A, B References to the figures at the end of this document are indi‐
cated by a black background.
DANGER
Hazard due to lack of effectiveness of the protective device
In the case of non-compliance, it is possible that the dangerous state of the machine
may not be stopped or not stopped in a timely manner.
Observe the enclosed safety notes.
b
The M4000 system is intended exclusively for use in industrial environments. Radio
interference may arise when used in residential areas.
You can find detailed information on how to use the product in the machine documen‐
tation or in the operating instructions of the product.
You can obtain declarations of conformity, certificates, and the current operating
instructions for the product at www.sick.com. To do so, enter the product part number
in the search field (part number: see the entry in the "P/N" or "Ident. no." field on the
type label).
The symbol indicates the sender.
s
The symbol indicates the receiver.
r
Complete overview of the LED statuses and their meanings: see operating instructions.
Sender displays
Position of LEDs: A
Position Display
7-segment display
1
Yellow
2
Function
Status indicator
Supply voltage
8028266/2023-03-23 | SICK
Subject to change without notice