Herunterladen Inhalt Inhalt Diese Seite drucken

Correct Use - Miele PWM 509 Kurzgebrauchsanweisung

Gewerbliche waschmaschine
Vorschau ausblenden Andere Handbücher für PWM 509:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
en - Warnings and safety notes
156
The washing machine may only be connected to the water supply
using the set of hoses supplied with the machine. Old sets of hoses
must not be re-used. Check the sets of hoses regularly for signs of
wear. Change the sets of hoses in good time to avoid the risk of leaks
and subsequent water damage.
The cause of any leaks must be dealt with before the washing ma-
chine is restarted. Disconnect the washing machine immediately if
any water leaks out.
Faulty components must only be replaced by genuine Miele spare
parts. Miele can only guarantee the safety standards of the machine
when Miele spare parts are used.
All relevant national provisions and regulations (DGUV in Germany)
relating to accident insurance are applicable to this machine. It is re-
commended to carry out testing in accordance with the regulatory
framework described in DGUV 100-500/Chapter 2.6/Section 4. The
test book required for the documentation is available from the Miele
Customer Service Department.
Please observe the instructions in "Installation and connection"
and "Technical data".
The plug for the washing machine must always be kept accessible
so that the machine can be easily disconnected from the power sup-
ply.
For hard-wired machines, an all-pole means of deactivation must
be provided on site.
If the machine is to be hard-wired, there must be a means of dis-
connecting all poles from the power supply. The mains isolator must
be close to the washing machine and be clearly identifiable, un-
hindered and easily accessible at all times.

Correct use

The maximum load size for PWM 509 is 9.0 kg of dry laundry. The
maximum load size for PWM 511 is 11.0 kg of dry laundry.
See the "Programme chart" for the maximum recommended load
sizes for individual programmes.
Before using the washing machine for the first time, check that the
transit bars have been removed (see "Installation – Removing the
transit bars"). During spinning, transit bars which are still in place may
result in damage to both the washing machine and adjacent furniture
or machines.
Never try to open the drum door of the washing machine using
force. The door can only be opened when a corresponding message
appears in the display.
Do not push the suspended drum unit while the machine is run-
ning.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Pwm 511

Inhaltsverzeichnis