Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 37
Digital ADAS
Calibration device
Multi
language
installation
manual

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für MAHLE TechPRO Digital ADAS

  • Seite 1 Digital ADAS Multi language Calibration device installation manual...
  • Seite 3 English Deutsch Français Portuguese Español Italiano Nederlands Polski...
  • Seite 4 Digital ADAS Installation manual...
  • Seite 5: Inhaltsverzeichnis

    Index General information General notes Identification Manufacturer identification Model identification About this manual Purpose of the manual Recipients Supply and storage Symbols used in this manual Safety General safety warnings Operator classification Description of the equipment Main components Intended use Receiving and unpacking the equipment Receiving the equipment Unpacking...
  • Seite 6 Digital ADAS Installation manual Installation / Assembly Permitted environmental conditions List of tools required for installation Fitting the feet Handles assembly for handling Digital ADAS CPU assembly Fitting the metric bar Digital target assembly Support base assembly Mirror assembly 7.10 Mounting reference plates on the clamps 7.11 Fitting the laser rangefinders 7.12 Digital ADAS CPU keyboard preparation First start-up of the equipment...
  • Seite 7: General Information

    Printing is permitted for the exclusive use of user and operators of the equipment to which this manual refers. MAHLE Aftermarket Italy S.p.A. and the resourc- es employed in the production of this manual do not assume any responsibility deriving from the...
  • Seite 8: Identification

    Model identification The equipment is manufactured by: The equipment covered by this manual is: Model: Digital ADAS MAHLE Aftermarket Italy S.p.A. Via Diesel, 10/A - 43122 Parma (Italy) The packing carton bears: Phone 39 0521 954411 - Fax 39 0521 954490 Product code email info.aftermarket@mahle.com...
  • Seite 9: About This Manual

    3. About this manual Purpose of the manual Supply and storage This manual describes the procedures to be fol- This manual is provided in electronic format. lowed for the unpacking, installation and initial setup of the Digital ADAS system. Keep this manual with the equipment for easy reference.
  • Seite 10: Symbols Used In This Manual

    Digital ADAS Installation manual Symbols used in this manual Symbols are used throughout this manual to em- phasize key information. The following symbols are used: Caution Symbol used to identify import- ant warnings for the operator and/or the equipment safety Prohibition Symbol used to identify operations that must not be...
  • Seite 11: Safety

    Installer / maintenance technician ence and knowledge Children must not play with the equipment. Technician trained by an Authorized MAHLE Cleaning and maintenance under the re- Service Center, able to install and intervene sponsibility of the user must not be carried...
  • Seite 12: Description Of The Equipment

    Mobile support structure as cameras and radar. Digital ADAS must be 65” Digital Target used in conjunction with a scantool produced by MAHLE Aftermarket Italy S.p.A. (see manual of Laser rangefinder the scantool instrument). Mirror for laser calibration Metric bar...
  • Seite 13: Receiving And Unpacking The Equipment

    Check that the product has not suffered shocks and/or damage There is a shock control device on the carton. If the control device is red, follow the instructions indicated on the label and notify MAHLE Aftermarket Italy S.p.A.
  • Seite 14: Unpacking

    Digital ADAS Installation manual Box D: 2x half-bars Unpacking 1x half-bar junction plug Tools needed: Removing the packaging Scissors Place the pallet in the place chosen for installation List of Accessories in the boxes Open the box and remove the pack- Box A: aging carton 1x Digital ADAS CPU (A1)
  • Seite 15 Box A Box B Box C...
  • Seite 16: Installation / Assembly

    Digital ADAS Installation manual 7. Installation / Assembly Permitted environmental List of tools required for conditions installation The environment in which the equipment is used The following tools are required to install the is an indoor environment protected from atmo- Digital ADAS system: spheric agents such as rain, hail, snow, fog, sus- pended dust, combustible dusts, must not be...
  • Seite 17: Fitting The Feet

    Fitting the feet Fitting the feet Place a cardboard on the working surface and turn the structure over on Inside the accessories box, there are 4 feet, nec- its side, in order to easily access the essary for a possible stabilization of the struc- fixing points of the feet ture, in case of excessive slant of the surface.
  • Seite 18: Handles Assembly For Handling

    Digital ADAS Installation manual Assembling the handles Handles assembly for Insert the long screws with washers handling in the appropriate holes of the handle tube, reaching the threaded holes of The structure is equipped with wheels and can the structure therefore be moved by pushing it using the spe- Tighten the screws using a 3 mm cial handles.
  • Seite 19: Digital Adas Cpu Assembly

    Tools needed: Digital ADAS CPU Phillips screwdriver assembly The Digital ADAS CPU enables the communi- cation between Digital ADAS and scantool. It is contained in a small box inside the accessories box, which also contains: 1x Digital ADAS CPU 1x Fixing bracket 1x Manual 1x HDMI cable L = 280mm 1x HDMI cable L = 870mm...
  • Seite 20 Digital ADAS Installation manual Assembling the Digital ADAS CPU Connect the power supply of the Digi- tal ADAS CPU to the multiple socket Attach the support bracket to the Digital ADAS CPU, using 2 of the 4 Note: the cable is already wired in the screws supplied structure Fix the Digital ADAS CPU to the...
  • Seite 21: Fitting The Metric Bar

    Place the second half of the metric Fitting the metric bar bar on the centering bar and secure it with the appropriate screws For easier installation of the metric bar, raise the structure to the max- Bar assembly on the structure imum, using the special remote control.
  • Seite 22 Digital ADAS Installation manual Scan for video tutorials...
  • Seite 23: Digital Target Assembly

    Digital target assembly Digital target assembly Open the carton by removing the blocks The structure must be raised/lowered to an easy height for the installer. The digital target is already Connect the power cord to the digital equipped with support bars. target Place the vertical bars on the support Make sure you have temporarily...
  • Seite 24 Digital ADAS Installation manual...
  • Seite 25: Support Base Assembly

    Insert the supplied screws and tighten Support base assembly them Note: use a 3 mm Allen key without Tools needed: tightening 3 mm Allen key Place the ribbed carpet Support base assembly Assemble the protection covers by placing the holes in the base in corre- spondence with the threaded holes in the support...
  • Seite 26: Mirror Assembly

    Digital ADAS Installation manual Mirror assembly Mirror assembly Unpack the mirror and its holder Tools needed: Place the mirror support in the base on the metric bar. Tighten the lower Phillips screwdriver handwheel 10 mm Allen key Place the mirror on the holder In calibration operations where the Note: the mirror must be positioned mirror is not necessary and where...
  • Seite 28: Mounting Reference Plates On The Clamps

    Digital ADAS Installation manual 7.10 Mounting reference plates on the clamps Mounting reference plates Insert the reference target fixing pin on the clamps into the through hole and screw it to the clamps The reference bubble must al- Place the clamps (ready to use) on the ways be at the top on the side of supports for their parking position the clamp lever.
  • Seite 29: Fitting The Laser Rangefinders

    7.11 Rangefinder assembly Fitting the laser Insert the batteries into the two laser rangefinders rangefinders Position the laser meters into the The rangefinders are equipped aluminium support, aligning the laser with a rechargeable battery. To meter to the back of the support. recharge the battery, connect the Tighten the fixing screw rangefinder using the special ca-...
  • Seite 30: Digital Adas Cpu Keyboard Preparation

    Digital ADAS Installation manual 7.12 Digital ADAS CPU keyboard preparation Digital ADAS CPU keyboard preparation Remove the Bluetooth device from the keyboard and connect it to the Digital ADAS CPU Add to the PC the USB cable for charging the keyboard's internal battery Place the keyboard switch in the "On”...
  • Seite 31: First Start-Up Of The Equipment

    8. First start-up of the equipment Select the desired language and First start-up and configu- country ration of the digital target Note: skip the connection of the digital target to the internet The first startup / configuration of View and accept the digital target the Digital ADAS system must be license agreement done by the dealer.
  • Seite 32: Connection And Update Of The Digital Adas Cpu

    Digital ADAS Installation manual Connection and update of Digital ADAS CPU the Digital ADAS CPU configuration via scantool It is necessary to configure the Digital ADAS Digital ADAS CPU connection and CPU by inserting the reference data of the Digital update ADAS into the scantool.
  • Seite 33 The software is displayed on the Digital ADAS CPU configuration via scantool digital target and the system is ready to work. The configuration is finished. Take the scantool The presence of the triangle in the center of the digital target indicates Open the Digital ADAS Settings menu what was written before.
  • Seite 34 Digital ADAS Installation manual...
  • Seite 35: Disposal

    9. Disposal Equipment disposal Packaging disposal The product complies with the re- Electrical and electronic equipment must never quirements of Community Directive be disposed of with household waste, but must 2012/19/EC. Disposal must be undergo a special recycling process. The pack- carried out in compliance with local aging must be disposed of in accordance with waste disposal regulations: do not...
  • Seite 36 Digital ADAS Installationshandbuch...
  • Seite 37 Inhaltsverzeichnis Allgemeine Informationen Allgemeine Anmerkungen Identifizierung Identifizierung des Herstellers Identifizierung des Modells Informationen zum Handbuch Zweck des Handbuchs Zielgruppe Lieferung und Aufbewahrung Im Handbuch verwendete Symbole Sicherheit Allgemeine Sicherheitshinweise Einstufung der Bediener Beschreibung des Gerätes Hauptbauteile Vorgesehene Verwendung Entgegennahme des Gerätes und Auspacken Entgegennahme des Gerätes Auspacken...
  • Seite 38 Digital ADAS Installationshandbuch Installation / Montage Zulässige Umweltbedingungen Liste der erforderlichen Werkzeuge für die Installation Montage der Stützfüße Montage der Griffe für die Versetzung Montage des Mini-PC Montage der Anschlagschiene Montage des digitalen Targets Montage der Auflage Montage des Spiegels 7.10 Montage der Laserziele an den Radklammern 7.11 Montage der Laser-Entfernungsmesser 7.12 Vorbereitung der Mini-PC-Tastatur...
  • Seite 39: Allgemeine Informationen

    Benutzers und der Bediener des Gerätes, chen auf das sich das Handbuch bezieht, ist erlaubt. MAHLE Aftermarket Italy S.p.A. und die in der Erstellung des Handbuchs eingesetzten Res- sourcen lehnen jede Verantwortung für Schäden ab, die auf eine unsachgemäße Verwendung sowohl des Handbuchs als auch des Gerätes...
  • Seite 40: Identifizierung

    Bei dem in diesem Handbuch beschriebenen Gerät handelt es sich um: Das Gerät wird hergestellt von: Modell: Digital ADAS MAHLE Aftermarket Italy S.p.A. Auf der Verpackung ist Folgendes angebracht: Via Diesel, 10/A - 43122 Parma, (Italy) Produktcode Tel. +39 0521 954411 – Fax +39 0521 954490 Beschreibung E-Mail info.aftermarket@mahle.com...
  • Seite 41: Informationen Zum Handbuch

    3. Informationen zum Handbuch Zweck des Handbuchs Lieferung und Aufbewahrung Dieses Handbuch beschreibt die zu befolgenden Vorgänge für das Auspacken, die Installation und Das Handbuch wird in elektronischer Form ge- die erste Konfiguration des Digital ADAS-Systems. liefert. Bei Zweifeln an der korrekten Interpretation der Das im Lieferumfang des Gerätes enthaltene Anleitungen wenden Sie sich an den techni- Handbuch so aufbewahren, dass es leicht ein-...
  • Seite 42: Im Handbuch Verwendete Symbole

    Digital ADAS Installationshandbuch Gebot Im Handbuch verwendete Symbol, das für die Identifizie- rung von Informationen beson- Symbole derer Bedeutung im Innern des Handbuchs verwendet wird Im Handbuch werden Symbole verwendet, um die bedeutendsten Informationen hervorzuhe- ben. Nachfolgend sind die verwendeten Symbo- le angeführt: Achtung Symbol, das für die Identifizie-...
  • Seite 43: Sicherheit

    Es ist verboten, das Gerät mit Wasser oder Flüssigkeiten in Kontakt zu bringen Techniker, der von einem autorisierten Während der Wartungsvorgänge am Gerät Kundendienstzentrum von MAHLE geschult dürfen keine mechanischen oder elektri- wurde und in der Lage ist, die mechani- schen Teile verändert werden schen und elektrischen Bauteile des Gerä-...
  • Seite 44: Beschreibung Des Gerätes

    Kalibrierung von Fahrerassistenzsystemen, wie Kamera und Bewegliches Traggestell Radar, entwickelt. Digital ADAS muss in Kombi- Digitales Target 65" nation mit einem von MAHLE Aftermarket Italy S.p.A. hergestellten Scantool verwendet werden Laser-Entfernungsmesser (siehe Handbuch des Scantool-Gerätes). Spiegel für die Laser-Kalibrierung...
  • Seite 45: Entgegennahme Des Gerätes Und Auspacken

    Seriennummer auf dem Verpackungs- karton überprüfen. Sicherstellen, dass das Produkt keine Stö- ße und/oder Schäden erlitten hat. Auf dem Karton ist ein Schockindikator ange- bracht. Falls der Schockindikator rot ist, den Hinweisen auf dem Aufkleber folgen und MAHLE Aftermarket Italy S.p.A. informieren.
  • Seite 46: Auspacken

    Digital ADAS Installationshandbuch 1x Satz Griffe ADAS (C2) 1x Abdeckung für Digital ADAS (C3) Auspacken 1x Abdeckung für Maßstableiste (C4) Erforderliche Werkzeuge: Schachtel D: 2x Halbleisten Schere 1x Verbindungsstecker für Halbleisten Liste der in den Schachteln enthaltenen Zu- Entfernung der Verpackung behörteile Die Palette am ausgewählten Installa- Schachtel A:...
  • Seite 47 Schachtel A Schachtel B Schachtel C...
  • Seite 48: Installation / Montage

    Digital ADAS Installationshandbuch 7. Installation / Montage Zulässige Umweltbedin- Liste der erforderlichen gungen Werkzeuge für die Installa- tion Das Umfeld, in dem das Gerät eingesetzt wird, liegt im Innern und ist vor Witterungseinflüssen Für die Installation des Digital ADAS-Systems wie Regen, Hagel, Schnee, Nebel, aufgewirbel- sind folgende Werkzeuge erforderlich: ter und entzündlicher Staub geschützt.
  • Seite 49: Montage Der Stützfüße

    Montage der Stützfüße Montage der Stützfüße Einen Karton auf die Ebene legen und das Traggestell auf die Seite drehen, Die Schachtel der Zubehörteile enthält 4 Stütz- um bequem auf die Befestigungspunk- füße, die bei einer übermäßig abfallenden Ebene te der Stützfüße zugreifen zu können für eine eventuelle Stabilisierung des Traggestells erforderlich sind.
  • Seite 50: Montage Der Griffe Für Die Versetzung

    Digital ADAS Installationshandbuch Montage der Griffe Montage der Griffe für die Die langen Schrauben mit Unterleg- Versetzung scheibe in die entsprechenden Löcher am Vierkantrohr der Griffe einführen, Das Traggestell ist mit Rädern ausgestattet und bis die Gewindelöcher des Tragge- kann demnach mithilfe der entsprechenden Grif- stells erreicht sind fe verschoben werden.
  • Seite 51: Montage Des Mini-Pc

    Erforderliche Werkzeuge: Montage des Mini-PC Kreuzschlitzschraubendreher Der Mini-PC ermöglicht die Kommunikation zwi- schen Digital ADAS und Scantool. Er ist in einem kleinen Kasten im Innern der Schachtel der Zu- behörteile angeordnet, in der unter anderem fol- gende Teile enthalten sind: 1x Mini-PC 1X Befestigungsbügel 1x Handbuch...
  • Seite 52 Digital ADAS Installationshandbuch Montage des Mini-PC Das Netzgerät des Mini-PC in die Mehrfachsteckdose einstecken Die Halteplatte am Mini-PC anbringen, dabei 2 der 4 mitgelieferten Schrau- Hinweis: Das Kabel ist bereits im ben verwenden Traggestell verkabelt Den Mini-PC mithilfe der vorstehen- Das HDMI-Kabel an den Mini-PC an- den Seite der Halteplatte unter Ver- schließen...
  • Seite 53: Montage Der Anschlagschiene

    Die zweite Hälfte der Anschlagschiene auf Montage der Anschlagschiene der Zentrierschiene positionieren und mit den entsprechenden Schrauben befestigen Für eine bequemere Installation der Anschlagschiene das Tragge- Montage der Schiene auf dem Traggestell stell über die Fernbedienung so weit wie möglich anheben. Die 2 Feststeller mit den Schrauben auf dem Traggestell positionieren Zum Anheben des Traggestells...
  • Seite 54 Digital ADAS Installationshandbuch Für Tutorial-Video scannen...
  • Seite 55: Montage Des Digitalen Targets

    Montage des digitalen Targets Montage des digitalen Den Karton öffnen und die Befesti- Targets gungen entfernen Das Stromkabel mit dem digitalen Das Traggestell muss auf eine für den Installateur Target verbinden bequeme Höhe angehoben/abgesenkt werden. Das digitale Target ist bereits mit Stützleisten Die vertikalen Stangen zwischen den ausgestattet.
  • Seite 56 Digital ADAS Installationshandbuch...
  • Seite 57: Montage Der Auflage

    Die mitgelieferten Schrauben einfügen Montage der Auflage und festziehen Hinweis: Einen 3-mm-Sechskant-In- Erforderliche Werkzeuge: busschlüssel verwenden und nicht zu fest anziehen 3-mm-Inbusschlüssel Die geriffelte Matte positionieren Montage der Auflage Das Schutzgehäuse montieren und dabei die Löcher der Auflage auf die Gewindelöcher des Traggestells aus- richten...
  • Seite 58: Montage Des Spiegels

    Digital ADAS Installationshandbuch Montage des Spiegels Montage des Spiegels Den Spiegel und seine Halterung auspacken Erforderliche Werkzeuge: Die Spiegelhalterung in dem Untersatz Kreuzschlitzschraubendreher auf der Anschlagschiene positionie- 10-mm-Inbusschlüssel ren. Das untere Handrad festziehen Den Spiegel auf die Halterung auf- Bei den Kalibrierungsvorgängen, setzen bei denen der Spiegel nicht erfor- derlich ist und das Fahrzeug sehr...
  • Seite 60: Montage Der Laserziele An Den Radklammern

    Digital ADAS Installationshandbuch 7.10 Montage der Laserziele an den Rad- Montage der Laserziele an klammern den Radklammern Den Sperrbolzen des Bezugstargets in das durchgehende Loch einführen Die Bezugs-Wasserwaage muss sich und an der Radklammer anschrauben stets oben an der Seite der Befesti- Die (zur Nutzung bereiten) Radklam- gungsmutter der Radklammern befin- mern auf den für deren Parkstellung...
  • Seite 61: Montage Der Laser-Entfernungsmesser

    7.11 Montage des Entfernungsmessers Montage der Laser-Entfer- Die Batterien in die beiden Laser-Ent- nungsmesser fernungsmesser einlegen Die Entfernungsmesser in die Alumi- Die Entfernungsmesser sind mit ei- niumhalterung einsetzen und dabei ner aufladbaren Batterie ausgestat- den Entfernungsmesser an der Rück- tet. Zum Aufladen der Batterie den seite der Halterung ausrichten.
  • Seite 62: Vorbereitung Der Mini-Pc-Tastatur

    Digital ADAS Installationshandbuch 7.12 Vorbereitung der Mini-PC- Tastatur Vorbereitung der Mini-PC-Tastatur Das Bluetooth-Gerät aus der Tastatur entnehmen und am Mini-PC anschließen Das USB-Kabel für die Aufladung der Batterie der Tastatur mit dem PC verbinden Den Schalter der Tastatur in die Posi- tion „On“...
  • Seite 63: Erste Inbetriebnahme Des Gerätes

    8. Erste Inbetriebnahme des Gerätes Das digitale Target mit der entspre- Erste Inbetriebnahme und chenden Fernbedienung einschalten Konfiguration des digitalen Die gewünschte Sprache und das Land auswählen Targets Hinweis: Die Verknüpfung des digita- Die erste Inbetriebnahme / Konfi- len Targets mit Internet überspringen guration des Digital ADAS-Sys- tems muss vom Händler durchge- Den Lizenzvertrag des digitalen Tar-...
  • Seite 64: Anschluss Und Aktualisierung Des Mini-Pc

    Digital ADAS Installationshandbuch Anschluss und Aktualisie- Konfiguration des Mini-PC rung des Mini-PC mit Scantool Es ist erforderlich, den Mini-PC durch Eingabe Anschluss und Aktualisierung des Mini- der Digital ADAS-Daten in Scantool zu konfigu- rieren Das digitale Target blendet nun die Bild- schirmseite des Diagnose-Tools ein und zeigt die Die gewünschte Sprache über die in Scantool auszuführenden Vorgänge an.
  • Seite 65 Auf dem digitalen Target wird die Konfiguration des Mini-PC mit Scantool Software angezeigt und das System Das Scantool nehmen ist betriebsbereit. Die Konfiguration ist abgeschlossen. Das Vorhandensein Die Seite des Menüs Einstellungen des Dreiecks in der Mitte des digitalen Digital ADAS im Scantool hochladen Targets zeigt die zuvor angeführten Die in der Abbildung angezeigte Taste Angaben an.
  • Seite 66 Digital ADAS Installationshandbuch...
  • Seite 67: Entsorgung

    9. Entsorgung Entsorgung des Gerätes Entsorgung der Verpa- ckungen Das Produkt erfüllt die Anforderun- gen der EG-Richtlinie 2012/19/EU. Die elektrischen und elektronischen Geräte dür- Die Entsorgung muss unter Einhal- fen niemals mit dem Hausmüll entsorgt werden, tung der lokalen Richtlinien über sondern müssen einem spezifischen Recycling- die Abfallentsorgung erfolgen: Das verfahren unterzogen werden.
  • Seite 68 Digital ADAS Manuel d’installation...
  • Seite 69 Sommaire Informations générales Remarques générales Identification Identification du fabricant Identification du modèle À propos de ce manuel Objet du manuel Destinataires Approvisionnement et stockage Symboles utilisés dans le manuel Sécurité Consignes de sécurité générales Classification des opérateurs Description de l’équipement Composants principaux Utilisation prévue Réception et déballage du matériel...
  • Seite 70 Digital ADAS Manuel d’installation Installation/montage Conditions environnementales autorisées Liste des outils nécessaires à l’installation Montage des pieds Montage des poignées de manipulation Montage du CPU du Digital ADAS Montage de la barre métrique Montage de la cible numérique Montage de la base de support Montage du miroir 7.10 Montage des plaques de référence sur les pinces 7.11 Montage des télémètres laser...
  • Seite 71: Informations Générales

    MAHLE Aftermarket Italy S.p.A. et les ressources employées dans la production de ce manuel n'assument aucune responsabilité découlant d'une mauvaise utilisation du manuel et de l'équipement, garantissant que les informations...
  • Seite 72: Identification

    L'équipement est fabriqué par : L'équipement présenté dans ce manuel est : Modèle : Digital ADAS MAHLE Aftermaket Italy S.p.A. Via Diesel, 10/A - 43122 Parme (Italie) Sur le carton d’emballage sont inscrits : Téléphone : 39 0521 954411 - Fax : 39 0521 954490 Le code du produit e-mail : info.aftermarket@mahle.com...
  • Seite 73: À Propos De Ce Manuel

    3. À propos de ce manuel Objet du manuel Approvisionnement et stockage Ce manuel décrit les procédures à suivre pour déballer, installer et procéder à la configuration Ce manuel est fourni en format imprimé et élec- initiale du système Digital ADAS. tronique.
  • Seite 74: Symboles Utilisés Dans Le Manuel

    Digital ADAS Manuel d’installation Symboles utilisés dans le manuel Des symboles sont utilisés dans ce manuel pour attirer l'attention sur des informations clés. Les symboles suivants sont utilisés : Attention Symbole servant à identifier les mises en garde importantes pour la sécurité de l’opérateur et/ou de l’équipement Interdiction Symbole servant à...
  • Seite 75: Sécurité

    élec- Technicien formé par un centre de service trique ou mécanique ne doit être modifiée agréé MAHLE, capable d’installer et d’in- Le branchement de l’équipement à la tervenir sur les composants électriques et source d’alimentation doit être effectué...
  • Seite 76: Description De L'équipement

    à la conduite, tels que les Structure de support mobile caméras et les radars. Digital ADAS doit être Cible numérique 65” (165 cm) utilisé avec un scantool fabriqué par MAHLE Aftermarket Italy S.p.A. (reportez-vous au Télémètre laser manuel de l’instrument scantool).
  • Seite 77: Réception Et Déballage Du Matériel

    Vérifiez que le produit n’a pas subi de chocs et/ou de dommages. Le carton dispose d’un dispositif de contrôle de choc. Si le dispositif de contrôle est rouge, sui- vez les instructions indiquées sur l’étiquette et informez MAHLE Aftermarket Italy S.p.A.
  • Seite 78: Déballage

    Digital ADAS Manuel d’installation Boîte D : 2x demi-barres Déballage 1x fiche de jonction de demi-barre Outils requis : Retrait de l'emballage Paire de ciseaux Placez la palette sur le site d’installa- tion choisi Liste des accessoires dans les boîtes Ouvrez la boîte et retirez le carton Boîte A: d’emballage...
  • Seite 79 Boîte A Boîte B Boîte C...
  • Seite 80: Installation/Montage

    Digital ADAS Manuel d’installation 7. Installation/montage Conditions environnemen- Liste des outils néces- tales autorisées saires à l’installation L’environnement dans lequel l’équipement est Les outils suivants sont nécessaires pour instal- utilisé est un environnement intérieur, protégé ler le système Digital ADAS : contre des agents atmosphériques comme la pluie, la grêle, la neige, le brouillard, la poussière Clé...
  • Seite 81: Montage Des Pieds

    Montage des pieds Montage des pieds Placez un carton sur la surface de travail et retournez la structure sur le La boîte des accessoires contient 4 pieds néces- côté, pour pouvoir accéder facilement saires pour stabiliser la structure si la surface est aux points de fixation des pieds trop penchée.
  • Seite 82: Montage Des Poignées De Manipulation

    Digital ADAS Manuel d’installation Montage des poignées Montage des poignées de Insérez les longues vis avec les ron- manipulation delles dans les orifices appropriés du tube de la poignée, en atteignant les La structure est équipée de roues qui vous per- trous filetés de la structure mettent de la déplacer en la poussant à...
  • Seite 83: Montage Du Cpu Du Digital Adas

    Outils requis : Montage du CPU du Tournevis cruciforme Digital ADAS Le CPU du Digital ADAS assure la communica- tion entre le Digital ADAS et le scantool. Il est dans une petite boîte à l’intérieur de la boîte des accessoires, qui contient également : 1 CPU du Digital ADAS 1x support de fixation 1x manuel...
  • Seite 84 Digital ADAS Manuel d’installation Montage du CPU du Digital ADAS Raccordez le bloc d'alimentation du CPU du Digital ADAS à la multiprise Fixez le support de fixation sur le CPU du Digital ADAS à l’aide de 2 des 4 vis Remarque : le câble est déjà...
  • Seite 85: Montage De La Barre Métrique

    Placez la seconde moitié de la barre Montage de la barre métrique sur la barre de centrage et blo- quez-la à l’aide des vis correspondantes métrique Pour faciliter l’installation de la Montage de la barre sur la structure barre métrique, levez la structure à la hauteur maximale à...
  • Seite 86 Digital ADAS Manuel d’installation Scannez pour consulter les tutoriels vidéo.
  • Seite 87: Montage De La Cible Numérique

    Montage de la cible numérique Montage de la cible Ouvrez le carton en retirant les élé- numérique ments faisant blocage Reliez le cordon d’alimentation à la La structure doit être levée/abaissée à une hau- cible numérique teur qui convient à l’installateur. La cible numé- rique est déjà...
  • Seite 88 Digital ADAS Manuel d’installation...
  • Seite 89: Montage De La Base De Support

    Insérez les vis fournies et vissez-les Montage de la base de Remarque : utilisez une clé hexa- support gonale de 3 mm sans serrer trop fortement Outils requis : Placez le tapis rainuré Clé hexagonale de 3 mm Montage de la base de support Montez les couvercles de protection en adaptant les trous de la base aux trous filetés situés sur le support...
  • Seite 90: Montage Du Miroir

    Digital ADAS Manuel d’installation Montage du miroir Montage du miroir Déballez le miroir et son support Outils requis : Placez le support du miroir dans la base sur la barre métrique. Serrez le Tournevis cruciforme volant inférieur Clé hexagonale de 10 mm Placez le miroir sur le support Il est recommandé...
  • Seite 92: Montage Des Plaques De Référence Sur Les Pinces

    Digital ADAS Manuel d’installation 7.10 Montage des plaques de référence sur Montage des plaques de les pinces référence sur les pinces Insérez le taquet de fixation de la cible de référence dans le trou débouchant La bulle de référence doit toujours et vissez-le sur les pinces être au sommet du côté...
  • Seite 93: Montage Des Télémètres Laser

    7.11 Montage du télémètre Montage des télémètres Insérez les piles dans les deux télé- laser mètres laser Installez le mètre laser dans le support Les télémètres laser sont équipés d'aluminium, en l'alignant sur l'arrière d’une pile rechargeable. Pour re- du support. Serrez la vis de fixation charger la pile, connectez le télé- mètre à...
  • Seite 94: Préparation Du Clavier Du Cpu Du Digital Adas

    Digital ADAS Manuel d’installation 7.12 Préparation du clavier du CPU du Digital ADAS Préparation du clavier du CPU du Digital ADAS Retirez le dispositif Bluetooth du cla- vier et branchez-le au CPU du Digital ADAS Ajoutez au PC le câble USB pour recharger la batterie interne du clavier Placez l’interrupteur du clavier dans la position « On »...
  • Seite 95: Première Mise En Service De L'équipement

    8. Première mise en service de l’équipement Sélectionnez la langue et le pays de Première mise en service votre choix et configuration de la cible Remarque : Ignorez la connexion de numérique la cible numérique à Internet Visualisez et acceptez le contrat de La première mise en service/confi- licence de la cible numérique guration du système Digital ADAS...
  • Seite 96: Branchement Et Mise À Jour Du Cpu Du Digital Adas

    Digital ADAS Manuel d’installation Branchement et mise à Configuration du CPU jour du CPU du Digital du Digital ADAS via le ADAS scantool Il est nécessaire de configurer le CPU du Digi- Branchement et mise à jour du CPU du tal ADAS en insérant les données de référence Digital ADAS du Digital ADAS dans le scantool.
  • Seite 97 Le logiciel s’affiche sur la cible numé- Configuration du CPU du Digital ADAS via le scantool rique, et le système est prêt à fonc- tionner. La configuration est terminée. Prenez le scantool La présence du triangle au centre de la cible numérique indique ce qui Ouvrez la page du menu Paramètres était écrit précédemment.
  • Seite 98 Digital ADAS Manuel d’installation...
  • Seite 99: Mise Au Rebut

    9. Mise au rebut Mise au rebut de Mise au rebut des l'équipement emballages Le produit est conforme aux exi- Les équipements électriques et électroniques gences de la directive communau- ne doivent jamais être éliminés avec les déchets taire 2012/19/CE. La mise au rebut ménagers, mais doivent subir un processus de doit être effectuée selon les régle- recyclage spécial.
  • Seite 100 Digital ADAS Manual de instalação...
  • Seite 101 Índice Informações gerais Notas gerais Identificação Identificação do fabricante Identificação do modelo Sobre este manual Finalidade do manual Destinatários Fornecimento e armazenamento Símbolos usados neste manual Segurança Avisos gerais de segurança Classificação do operador Descrição do equipamento Principais componentes Uso pretendido Receber e desembalar o equipamento Receber o equipamento Desembalagem...
  • Seite 102 Digital ADAS Manual de instalação Instalação/ Montagem Condições ambientais permitidas Lista de ferramentas necessárias para instalação Encaixar os pés Montagem das pegas para manuseamento Montagem da CPU digital ADAS Encaixar a barra métrica Montagem do alvo digital Montagem da base de suporte Montagem do espelho 7.10 Montar as placas de referência nos grampos 7.11 Encaixar os telémetros laser...
  • Seite 103: Informações Gerais

    A impressão é permitida para o uso exclusivo do utilizador e operadores do equipamento ao qual o manual se refere. A MAHLE Aftermarket Italy S.p.A. e os recursos empregues na produção deste manual não as- sumem qualquer responsabilidade que derive do uso inapropriado do manual e do equipamento, garantindo que a informação constante no pre-...
  • Seite 104: Identificação

    O equipamento é fabricado por: O equipamento coberto por este manual é: Modelo: Digital ADAS MAHLE Aftermarket Italy S.p.A. Via Diesel, 10/A - 43122 Parma (Itália) A embalagem de cartão apresenta: Telefone 39 0521 954411 - Fax 39 0521 954490 Código do produto...
  • Seite 105: Sobre Este Manual

    3. Sobre este manual Finalidade do manual Fornecimento e armazenamento O manual descreve os procedimentos a seguir para desembalar, instalar e configuração inicial Este manual é fornecido em formato eletrónico. do sistema Digital ADAS. Mantenha este manual com o equipamento para Em caso de dúvidas sobre a correta interpre- facilitar a referência.
  • Seite 106: Símbolos Usados Neste Manual

    Digital ADAS Manual de instalação Símbolos usados neste manual Os símbolos são usados ao longo deste manual para enfatizar as informações-chave. Os seguin- tes símbolos são usados: Cuidado Símbolo usado para identifi- car avisos importantes para o operador e/ou a segurança do equipamento Proibição Símbolo usado para identificar...
  • Seite 107: Segurança

    Técnico com formação por um Centro de O contacto do equipamento com água ou Serviço MAHLE Autorizado, capaz de insta- líquidos é proibido lar e intervir em componentes mecânicos e Durante as operações de manutenção no elétricos do equipamento...
  • Seite 108: Descrição Do Equipamento

    O Digital ADAS deve Alvo digital de 65" ser utilizado em conjunto com uma ferramen- ta de análise (scantool) produzida pela MAHLE Telémetro laser Aftermarket Italy S.p.A. (consulte o manual do Espelho para calibração a laser instrumento da ferramenta de análise).
  • Seite 109: Receber E Desembalar O Equipamento

    Verifique se o produto não sofreu choques e/ou danos Existe um dispositivo de controlo de choque na embalagem. Se o dispositivo de controlo estiver vermelho, siga as instruções indicadas no autoco- lante e notifique a MAHLE Aftermarket Italy S.p.A.
  • Seite 110: Desembalagem

    Digital ADAS Manual de instalação Caixa D: 2x meias-barras Desembalagem 1x ficha de junção de meia-barra Ferramentas necessárias: Remover a embalagem Tesoura Coloque a palete no local escolhido para a instalação Lista de Acessórios nas caixas Abra a caixa e remova a caixa de Caixa A: embalagem 1x CPU Digital ADAS (A1)
  • Seite 111 Caixa A Caixa B Caixa C...
  • Seite 112: Instalação/ Montagem

    Digital ADAS Manual de instalação 7. Instalação/ Montagem Condições ambientais Lista de ferramentas ne- permitidas cessárias para instalação O ambiente em que o equipamento é utilizado é São necessárias as seguintes ferramentas para um ambiente interior, protegido de agentes at- instalar o sistema Digital ADAS: mosféricos, como chuva, granizo, neve, nevoei- ro, poeiras suspensas, poeiras combustíveis,...
  • Seite 113: Encaixar Os Pés

    Encaixar os pés Encaixar os pés Coloque um cartão na superfície de trabalho e vire a estrutura de lado, No interior da caixa de acessórios estão 4 pés, para aceder facilmente aos pontos de necessários para uma possível estabilização da encaixe dos pés estrutura, no caso de inclinação excessiva da superfície.
  • Seite 114: Montagem Das Pegas Para Manuseamento

    Digital ADAS Manual de instalação Montar as pegas Montagem das pegas Insira os parafusos longos com para manuseamento anilhas nos devidos orifícios do tubo da pega, alcançando os orifícios A estrutura está equipada com rodas e pode, roscados da estrutura portanto, ser movida ao empurrar ao utilizar as Aperte os parafusos com uma chave pegas especiais.
  • Seite 115: Montagem Da Cpu Digital Adas

    Ferramentas necessárias: Montagem da CPU digital • Chave de fenda Phillips ADAS A CPU Digital ADAS permite a comunicação en- tre ADAS Digital e a ferramenta de análise (scan- tool). Está numa caixa pequena, no interior da caixa de acessórios, que também contém: 1x CPU digital ADAS 1x Suporte de encaixe 1x Manual...
  • Seite 116 Digital ADAS Manual de instalação Montagem da CPU Digital ADAS Conectar a fonte de alimentação da CPU Digital ADAS à tomada múltipla Fixar o braço de suporte ao CPU ADAS Digital, utilizando 2 dos 4 para- Nota: o cabo já está ligado na estru- fusos fornecidos tura Fixar a CPU Digital ADAS no poste...
  • Seite 117: Encaixar A Barra Métrica

    Coloque a segunda metade da barra Encaixar a barra métrica métrica na barra de centro e fixe-a com os parafusos apropriados Para uma instalação facilitada da barra métrica, eleve a estrutura ao Montagem da barra na estrutura máximo com o controlo remoto es- pecial.
  • Seite 118 Digital ADAS Manual de instalação Procure por tutoriais em vídeo...
  • Seite 119: Montagem Do Alvo Digital

    Montagem do alvo digital Montagem do alvo digital Abra a caixa removendo os blocos A estrutura deve ser elevada/baixada a uma al- Conecte o cabo de alimentação ao tura fácil para o instalador. O alvo digital já está alvo digital equipado com barras de suporte.
  • Seite 120 Digital ADAS Manual de instalação...
  • Seite 121: Montagem Da Base De Suporte

    Introduza os parafusos fornecidos e Montagem da base de aperte suporte Nota: Utilize uma chave Allen de 3 mm sem apertar Ferramentas necessárias: Coloque o tapete estriado Chave Allen de 3 mm Montagem da base de suporte Monte a as coberturas de proteção, co- locando os orifícios na base alinhados com os orifícios roscados no suporte...
  • Seite 122: Montagem Do Espelho

    Digital ADAS Manual de instalação Montagem do espelho Montagem do espelho Desembale o espelho e respetivo suporte Ferramentas necessárias: Coloque o suporte do espelho na Chave de fenda Phillips base da barra métrica. Aperte o Chave Allen de 10 mm volante inferior Coloque o espelho no suporte Nas operações de calibração em...
  • Seite 124: Montar As Placas De Referência Nos Grampos

    Digital ADAS Manual de instalação 7.10 Montar as placas de referência nos Montar as placas de grampos referência nos grampos Introduza o pino de encaixe do alvo de referência no orifício e enrosque-o A bolha de referência deve estar aos grampos sempre no topo, do lado da ala- Coloque os grampos (prontos a vanca do grampo.
  • Seite 125: Encaixar Os Telémetros Laser

    7.11 Montagem do telémetro Encaixar os telémetros Insira as baterias nos dois telémetros laser laser Posicione os medidores a laser num Os telémetros estão equipados suporte de alumínio, alinhando o com uma bateria carregável. Para medidor a laser com a traseira do carregar a bateria, ligue o teléme- suporte.
  • Seite 126: Preparação Do Teclado Da Cpu Digital Adas

    Digital ADAS Manual de instalação 7.12 Preparação do teclado da CPU Digital ADAS Preparação do teclado da CPU Digital ADAS Remova o dispositivo Bluetooth do teclado e conecte-o à CPU Digital ADAS Adicione ao computador o cabo USB para carregar a bateria interna do teclado Coloque o interruptor do teclado na posição "On"...
  • Seite 127: Primeiro Arranque Do Equipamento

    8. Primeiro arranque do equipamento Selecione o idioma e país pretendidos Primeiro arranque e confi- Nota: Ignore a ligação do alvo digital guração do alvo digital à Internet Ver e aceitar o acordo da licença do O primeiro arranque / configura- alvo digital ção do sistema Digital ADAS de- vem ser feitos pelo distribuidor.
  • Seite 128: Conexão E Atualização Da Cpu Digital Adas

    Digital ADAS Manual de instalação Conexão e atualização da Configuração da CPU Digital ADAS CPU Digital ADAS via ferramenta de análise Ligação e atualização da Digital ADAS CPU (scantool) Utilizando o teclado da ADAS Digital É necessário configurar a CPU Digital ADAS ao CPU, selecione o idioma desejado inserir os dados de referência do Digital ADAS na Configurar a rede WiFi a que pretende...
  • Seite 129 O software é exibido no alvo digital e Configuração da CPU Digital ADAS via ferramenta de análise (scantool) o sistema está pronto a funcionar. A configuração está concluída. A pre- Retire a ferramenta de análise (scan- sença do triângulo no centro do alvo tool) digital indica que foi escrito antes.
  • Seite 130 Digital ADAS Manual de instalação...
  • Seite 131: Eliminar

    9. Eliminar Eliminação do Eliminação da embalagem equipamento O equipamento elétrico e eletrónico nunca deve ser eliminado junto com o lixo doméstico, mas O produto está em conformidade deve ser sujeito a um processo de reciclagem com os requisitos da Diretiva Co- especial.
  • Seite 132 Digital ADAS Manual de Instalación...
  • Seite 133 Índice Información general Notas generales Identificación Identificación del fabricante Identificación de modelo Acerca de este manual Finalidad del manual Destinatarios Suministro y almacenamiento Símbolos usados en este manual Seguridad Advertencias generales sobre seguridad Clasificación de operarios Descripción del equipo Componentes principales Uso pretendido Recepción y desembalaje del equipo Recepción del equipo...
  • Seite 134 Digital ADAS Manual de Instalación Instalación/ensamblaje Condiciones ambientales permitidas Lista de herramientas necesarias para la instalación Acople de las patas Ensamblaje de los asideros para el manejo Conjunto de Digital ADAS CPU Acople de la barra métrica Ensamblaje de la diana digital Ensamblaje de la base de soporte Ensamblaje del espejo 7.10 Placas de referencia para el montaje sobre las pinzas...
  • Seite 135: Información General

    1. Información general El producto puede ser sometido a modificacio- nes y mejoras. MAHLE Aftermarket Italy S.p.A. Notas generales se reserva el derecho de modificar sin aviso la información contenida en el manual. Gracias para adquirir el sistema Digital ADAS.
  • Seite 136: Identificación

    El equipo ha sido fabricado por: El equipo cubierto por este manual es: Modelo: Digital ADAS MAHLE Aftermarket Italy S.p.A. Via Diesel, 10/A - 43122 Parma (Italia) La caja de cartón lleva: Teléfono 39 0521 954411 - Fax 39 0521 954490 Código de producto...
  • Seite 137: Acerca De Este Manual

    3. Acerca de este manual Finalidad del manual Suministro y almacenamiento Este manual describe los procedimientos a se- guir para desembalaje, instalación y configura- Este manual se proporciona en formato electró- ción inicial del sistema Digital ADAS. nico. En caso de dudas acerca de la correcta inter- Este manual se debe conservar con el equipo pretación de las instrucciones, contactar con el para tener una referencia fácil.
  • Seite 138: Símbolos Usados En Este Manual

    Digital ADAS Manual de Instalación Símbolos usados en este manual Por todo este manual se usan símbolos para destacar información clave. Se usan los siguien- tes símbolos: Precaución Símbolo usado para identificar advertencias importantes para la seguridad del operario y/o el equipo Prohibición Símbolo usado para identificar...
  • Seite 139: Seguridad

    Técnico entrenado por un Centro de Servi- sabilidad del usuario no deben ser realiza- cio MAHLE Autorizado, capaz de instalar e dos por niños intervenir en los componentes mecánicos y Se prohíbe cualquier contacto del equipo eléctricos del equipo...
  • Seite 140: Descripción Del Equipo

    Estructura de soporte móvil cámaras y radar. Digital ADAS se debe usar Diana digital de 65” conjuntamente con una scantool producida por MAHLE Aftermarket Italy S.p.A. (ver manual del Telémetro láser instrumento scantool). Espejo para calibración láser Barra métrica...
  • Seite 141: Recepción Y Desembalaje Del Equipo

    Comprobar que el producto no haya sufri- do choques y/o daño Hay un dispositivo de control de choque en la caja de cartón. Si el dispositivo de control está rojo, seguir las instrucciones indicadas en la etiqueta y notificarlo a MAHLE Aftermarket Italy S.p.A.
  • Seite 142: Desembalaje

    Digital ADAS Manual de Instalación Caja D: 2x semibarras Desembalaje 1x tapón de empalme de semibarra Herramientas necesarias: Retirada del embalaje Tijeras Colocar el palé en el lugar elegido para la instalación Lista de accesorios en las cajas Abrir la caja y retirar la caja de cartón Caja A: de embalaje 1x Digital ADAS CPU (A1)
  • Seite 143 Caja A Caja B Caja C...
  • Seite 144: Instalación/Ensamblaje

    Digital ADAS Manual de Instalación 7. Instalación/ensamblaje Condiciones ambientales Lista de herramientas permitidas necesarias para la instalación El ambiente en el que se usa el equipo es un ambiente de interior protegido de agentes at- Para instalar el sistema Digital ADAS se necesi- mosféricos tales como lluvia, granizo, nieve, nie- tan las siguientes herramientas: bla, polvo suspendido, polvos combustibles, no...
  • Seite 145: Acople De Las Patas

    Acople de las patas Acople de las patas Colocar un cartón sobre la superficie de trabajo y girar la estructura sobre Dentro de la caja de accesorios, hay 4 patas, su lado, a fin de acceder fácilmente a necesarias para una posible estabilización de la los puntos de fijación de las patas estructura, en caso de excesiva inclinación de la superficie.
  • Seite 146: Ensamblaje De Los Asideros Para El Manejo

    Digital ADAS Manual de Instalación Ensamblaje de los asideros Ensamblaje de los Insertar los tornillos largos con asideros para el manejo arandelas en los orificios apropiados del tubo de asidero, llegando a los ori- La estructura está equipada con ruedas y por lo ficios roscados de la estructura tanto puede ser movida empujándola usando los Apretar los tornillos usando una llave...
  • Seite 147: Conjunto De Digital Adas Cpu

    Herramientas necesarias: Conjunto de Digital ADAS Destornillador Philips La Digital ADAS CPU permite la comunicación entre Digital ADAS y scantool. Está contenido en una caja pequeña dentro de la caja de acceso- rios, que también contiene: 1x Digital ADAS CPU 1x Escuadra de fijación 1x Manual 1x Cable HDMI L = 280 mm...
  • Seite 148 Digital ADAS Manual de Instalación Ensamblaje de la Digital ADAS CPU Conectar la fuente de alimentación de la Digital ADAS CPU a la toma Conectar la escuadra de soporte a la múltiple Digital ADAS CPU, usando 2 de los 4 tornillos suministrados Nota: el cable ya está...
  • Seite 149: Acople De La Barra Métrica

    Insertar la segunda mitad de la barra Acople de la barra métrica métrica sobre la barra centradora y fijarla con los tornillos apropiados Para una instalación más fácil de la barra métrica, subir la estructura al Ensamblaje de la barra sobre la estructura máximo, usando el control remoto especial.
  • Seite 150 Digital ADAS Manual de Instalación Escanear vídeotutoriales...
  • Seite 151: Ensamblaje De La Diana Digital

    Ensamblaje de la diana digital Ensamblaje de la diana Abrir la caja de cartón retirando los digital bloques Conectar el cable de alimentación a la La estructura se debe subir/bajar a una altura diana digital fácil para el instalador. La diana digital ya está equipada con barras de soporte.
  • Seite 152 Digital ADAS Manual de Instalación...
  • Seite 153: Ensamblaje De La Base De Soporte

    Insertar los tornillos suministrados y Ensamblaje de la base de luego apretarlos soporte Nota: usar una llave Allen de 3 mm sin apretar Herramientas necesarias: Colocar la alfombra nervada Llave Allen de 3 mm Ensamblaje de la base de soporte Ensamblar las cubiertas de protección colocando los orificios de la base en correspondencia con los orificios roscados del soporte...
  • Seite 154: Ensamblaje Del Espejo

    Digital ADAS Manual de Instalación Ensamblaje del espejo Ensamblaje del espejo Desembalar el espejo y su soporte Herramientas necesarias: Colocar el soporte del espejo en la base sobre la barra métrica. Apretar el Destornillador Philips volante inferior Llave Allen de 10 mm Colocar el espejo sobre el soporte En operaciones de calibración en Nota: el espejo se debe colocar de...
  • Seite 156: Placas De Referencia Para El Montaje Sobre Las Pinzas

    Digital ADAS Manual de Instalación 7.10 Placas de referencia para el montaje Placas de referencia para sobre las pinzas el montaje sobre las pinzas Insertar el pasador de fijación de dia- na de referencia en el orificio pasante La burbuja de referencia siempre y atornillarlo a las pinzas debe estar en la parte superior del Colocar las pinzas (preparadas para...
  • Seite 157: Acople De Los Telémetros Láser

    7.11 Ensamblaje del telémetro Acople de los telémetros Insertar las baterías en los dos telé- láser metros láser Colocar los medidores láser dentro del Los telémetros están equipados soporte de aluminio, alineando el me- con una batería recargable. Para didor láser con la parte posterior del recargar la batería, conectar el te- soporte.
  • Seite 158: Preparación Del Teclado De Digital Adas Cpu

    Digital ADAS Manual de Instalación 7.12 Preparación del teclado de Digital ADAS CPU Preparación del teclado de Digital ADAS Retirar el dispositivo Bluetooth del teclado y conectarlo al la Digital ADAS Añadir al PC el cable USB para cargar la batería interna del teclado Colocar el interruptor del teclado en la posición "On”...
  • Seite 159: Primer Arranque Del Equipo

    8. Primer arranque del equipo Seleccionar el idioma y el país que se Primer arranque y configu- quiera ración de la diana digital Nota: Omitir la conexión de la diana digital a internet El primer arranque/configuración Ver y aceptar el acuerdo de licencia del sistema Digital ADAS debe ser de la diana digital realizado por el distribuidor.
  • Seite 160: Conexión Y Actualización De La Digital Adas Cpu

    Digital ADAS Manual de Instalación Conexión y actualización Configuración de la Digital de la Digital ADAS CPU ADAS CPU por medio de scantool Conexión y actualización de la Digital ADAS CPU Es necesario configurar la Digital ADAS CPU introduciendo los datos de referencia de Digital Usando el teclado de la Digital ADAS ADAS en la scantool.
  • Seite 161 El software se muestra en la diana Configuración de la Digital ADAS CPU por medio de scantool digital y el sistema está preparado para trabajar. La configuración ha fina- Coger la scantool lizado. La presencia del triángulo en el centro de la diana digital indica que se Abrir la página de menú...
  • Seite 162 Digital ADAS Manual de Instalación...
  • Seite 163: Eliminación

    9. Eliminación Eliminación del equipo Eliminación de embalajes El producto cumple los requisitos Los equipos eléctricos y electrónicos nunca de- Directiva Comunitaria ben ser desechados con la basura doméstica, 2012/19/CE. La eliminación debe deben ser sometidos a un proceso de reciclaje ser llevada a cabo cumpliendo los especial.
  • Seite 164 Digital ADAS Manuale d'installazione...
  • Seite 165 Indice Informazioni generali Note generali Identificazione Identificazione fabbricante Identificazione modello Informazioni sul manuale Scopo del manuale Destinatari Fornitura e conservazione Simbologia utilizzata all'interno del manuale Sicurezze Avvertenze generali di sicurezza Classificazione operatori Descrizione dell'apparecchiatura Componenti principali Uso previsto Ricezione apparecchiatura e disimballo Ricezione apparecchiatura Disimballo...
  • Seite 166 Digital ADAS Manuale d'installazione Installazione / Montaggio Condizioni ambientali ammesse Lista utensili necessari all'installazione Montaggio dei piedini Montaggio maniglie per la movimentazione Montaggio MiniPC Montaggio barra metrica Montaggio target digitale Montaggio base di appoggio Montaggio specchio 7.10 Montaggio piastre di riferimento sulle graffe 7.11 Montaggio telemetri laser 7.12 Preparazione tastiera MiniPC Primo avvio dell'apparecchiatura...
  • Seite 167: Informazioni Generali

    È consentita la stampa ad uso esclusivo dell’u- tente e degli operatori della apparecchiatura a cui il manuale si riferisce. MAHLE Aftermarket Italy S.p.A. e le risorse im- piegate nella realizzazione del manuale, non si assumono nessuna responsabilità derivan- te dall’utilizzo improprio sia del manuale che dell’apparecchiatura, garantendo che le infor-...
  • Seite 168: Identificazione

    Identificazione modello L’apparecchiatura è prodotta da: L’apparecchiatura oggetto del presente manuale è: MAHLE Aftermarket Italy S.p.A. Modello: Digital ADAS Via Diesel, 10/A - 43122 Parma, (Italy) Tel. +39 0521 954411 – Fax +39 0521 954490 Sul cartone di imballo sono presenti: e-mail info.aftermarket@mahle.com...
  • Seite 169: Informazioni Sul Manuale

    3. Informazioni sul manuale Scopo del manuale Fornitura e conservazione Questo manuale descrive le procedure da segui- Il manuale è fornito in formato elettronico. re per il disimballaggio, l'installazione e la prima configurazione del sistema Digital ADAS. Conservare il presente manuale a corredo dell'apparecchiatura, in modo da poter essere In caso di dubbi sulla corretta interpretazione facilmente consultato.
  • Seite 170: Simbologia Utilizzata All'interno Del Manuale

    Digital ADAS Manuale d'installazione Simbologia utilizzata all'interno del manuale All’interno del manuale vengono utilizzati simboli per enfatizzare le informazioni di rilevante impor- tanza. Di seguito sono riportati quelli utilizzati: Attenzione Simbolo utilizzato per identifi- care avvertenze importanti per la sicurezza dell’operatore e/o dell'apparecchiatura Divieto Simbolo utilizzato per identifica-...
  • Seite 171: Sicurezze

    Tecnico addestrato da un Centro di È vietato il contatto dell’apparecchiatura Assistenza Autorizzato MAHLE, in grado con acqua o liquidi di installare ed intervenire sui componenti Durante le operazioni di manutenzione meccanici ed elettrici dell’apparecchiatura dell’apparecchiatura non devono essere...
  • Seite 172: Descrizione Dell'apparecchiatura

    Struttura mobile di supporto come telecamera e radar. Digital ADAS deve es- Target digitale 65" sere utilizzato in abbinamento ad uno scantool prodotto da MAHLE Aftermarket Italy S.p.A. (ve- Telemetro laser dere manuale dello strumento scantool). Specchio per calibrazione laser...
  • Seite 173: Ricezione Apparecchiatura E Disimballo

    Controllare che il prodotto non abbia subito urti e/o danni Sul cartone è presente un dispositivo di controllo urti. Qualora il dispositivo di controllo sia di colo- re rosso, seguire le istruzioni indicate sull'adesivo e avvisare MAHLE Aftermarket Italy S.p.A.
  • Seite 174: Disimballo

    Digital ADAS Manuale d'installazione Scatola D: 2x semibarre Disimballo 1x spina di giunzione semibarre Utensili necessari: Rimozione dell'imballo Forbice Posizionare il pallet nel luogo scelto per l'installazione Lista accessori presenti nelle scatole Aprire la scatola e rimuovere il cartone Scatola A: di imballaggio 1x MiniPC (A1) Tagliare le reggette di fissaggio al pal-...
  • Seite 175 Scatola A Scatola B Scatola C...
  • Seite 176: Installazione / Montaggio

    Digital ADAS Manuale d'installazione 7. Installazione / Montaggio Condizioni ambientali Lista utensili necessari ammesse all'installazione L’ambiente in cui l'apparecchiatura è utilizzata è Per l'installazione del sistema Digital ADAS sono un ambiente interno al riparo da agenti atmosfe- necessari i seguenti utensili: rici quali pioggia, grandine, neve, nebbia, polveri in sospensione, polveri combustibili e non deve Chiave a brugola da 3 mm...
  • Seite 177: Montaggio Dei Piedini

    Montaggio dei piedini Montaggio dei piedini Posizionare un cartone sul piano e capovolgere la struttura sul fianco, in All’interno della scatola accessori, sono presenti modo da accedere agevolmente ai n°4 piedini, necessari per un eventuale stabiliz- punti di fissaggio dei piedini zazione della struttura, in caso di pendenza ec- cessiva del piano.
  • Seite 178: Montaggio Maniglie Per La Movimentazione

    Digital ADAS Manuale d'installazione Montaggio delle maniglie Montaggio maniglie per la Inserire le lunghe viti con rondella negli movimentazione appositi fori del tubolare della maniglia, raggiungendo i fori filettati della struttura La struttura è dotata di ruote e può quindi esse- Stringere le viti utilizzando una chiave a re movimentata spingendola tramite le apposite brugola da 3 mm...
  • Seite 179: Montaggio Minipc

    Utensili necessari: Montaggio MiniPC Giravite a croce Il MiniPC permette la comunicazione tra Digital ADAS e scantool. È contenuto in una scatolina all'interno della scatola accessori, dove sono inoltre presenti: 1x MiniPC 1x Staffa fissaggio 1x manualistica 1x cavo HDMI L=280mm 1x cavo HDMI L=870mm 3x vite TSP+ (testa svasata piano con inta- glio a croce) M4X6...
  • Seite 180 Digital ADAS Manuale d'installazione Montaggio del MiniPC Collegare l'alimentatore del MiniPC alla presa multipla Applicare la staffa di supporto al Mini PC, utilizzando 2 delle 4 viti date in Nota: il cavo è già cablato nella dotazione struttura Fissare il MiniPC al piantone verti- Collegare il cavo HDMI al MiniPC cale della struttura mediante il lato sporgente della staffa di supporto,...
  • Seite 181: Montaggio Barra Metrica

    Posizionare la seconda metà di barra Montaggio barra metrica metrica sulla barra di centraggio e fissarla con le apposite viti Per una più agevole installazione della barra metrica, sollevare al Assemblaggio barra su struttura massimo la struttura, utilizzando l'apposito telecomando. Posizionare sulla struttura i 3 fermi con le viti Per eseguire il sollevamento della...
  • Seite 182 Digital ADAS Manuale d'installazione Scansiona per video tutorial...
  • Seite 183: Montaggio Target Digitale

    Montaggio del target digitale Montaggio target digitale Aprire il cartone rimuovendo i blocchi La struttura deve essere alzata/abbassata ad Collegare il cavo di alimentazione al un’altezza agevole per l’installatore. Il target digi- target digitale tale è già dotato di barre di supporto. Appoggiare le barre verticali sul binario di supporto fra gli appositi dentini Assicurarsi di aver rimosso tem-...
  • Seite 184 Digital ADAS Manuale d'installazione...
  • Seite 185: Montaggio Base Di Appoggio

    Inserire le viti in dotazione e serrare Montaggio base di Nota: utilizzare una chiave esagonale appoggio maschio brugola da 3 mm senza stringere Utensili necessari: Posizionare il tappeto millerighe Chiave a brugola da 3 mm Montaggio base appoggio Montare i carter di protezione metten- do i fori della base in corrispondenza dei fori filettati del supporto...
  • Seite 186: Montaggio Specchio

    Digital ADAS Manuale d'installazione Montaggio specchio Montaggio specchio Disimballare lo specchio e il suo sup- porto Utensili necessari: Posizionare il supporto specchio nella Giravite a croce base presente sulla barra metrica. Strin- Chiave a brugola da 10 mm gere il volantino inferiore Posizionare lo specchio sul supporto Nelle operazioni di calibrazione in cui non è...
  • Seite 188: Montaggio Piastre Di Riferimento Sulle Graffe

    Digital ADAS Manuale d'installazione 7.10 Montaggio piastre riferimento graffe Montaggio piastre di Inserire il perno di fissaggio del target riferimento sulle graffe di riferimento nel foro passante e avvitarlo alla graffa La bolla di riferimento deve tro- Posizionare le graffe (pronte all’utilizzo) varsi sempre in alto dalla parte del sui supporti preposti per la loro posta- manettino delle graffe.
  • Seite 189: Montaggio Telemetri Laser

    7.11 Montaggio telemetro Montaggio telemetri laser Inserire le batterie nei due telemetri laser I telemetri sono dotati di batteria ricaricabile. Per ricaricare la bat- Posizionare i telemetri all'interno del teria, collegare il telemetro tramite supporto in alluminio, allineando po- l’apposito cavo dato in dotazione steriormente il telemetro al supporto.
  • Seite 190: Preparazione Tastiera Minipc

    Digital ADAS Manuale d'installazione 7.12 Preparazione tastiera MiniPC Preparazione tastiera MiniPC Estrarre il dispositivo Bluetooth dalla tastiera e collegarlo al MiniPC Aggiungere al PC il cavo USB per la ricarica della batteria interna della tastiera Posizionare l'interruttore della tastiera nella posizione "On" Nota: posizionare l'interruttore su "Off"...
  • Seite 191: Primo Avvio Dell'apparecchiatura

    8. Primo avvio dell'apparecchiatura Selezionare la lingua desiderata e la Primo avvio e configura- nazione zione del target digitale Nota: saltare la connessione del target digitale a internet Il primo avvio / configurazione del Visualizzare e accettare il contratto di sistema Digital ADAS deve essere licenza del target digitale eseguito dal rivenditore.
  • Seite 192: Connessione E Aggiornamento Del Minipc

    Digital ADAS Manuale d'installazione Connessione e aggiorna- Configurazione MiniPC mento del MiniPC mediante scantool È necessario configurare il MiniPC inserendo nel- Connessione e aggiornamento MiniPC lo scantool i dati di riferimento del Digital ADAS. Il target digitale visualizza ora lo schermo dello Mediante la tastiera del MiniPC, sele- strumento di diagnosi e indica le operazioni da zionare la lingua desiderata...
  • Seite 193 Sul target digitale viene visualizzato Configurazione del MiniPC mediante lo scantool il software ed il sistema è pronto per lavorare. La configurazione è Prendere lo scantool terminata. La presenza del triangolo al centro del target digitale indica quanto Aprire la pagina del menù Impostazio- scritto prima.
  • Seite 194 Digital ADAS Manuale d'installazione...
  • Seite 195: Smaltimento

    9. Smaltimento Smaltimento Smaltimento imballi apparecchiatura Le apparecchiature elettriche ed elettroniche non devono mai venire smaltite con i rifiuti domesti- Il prodotto soddisfa i requisiti della ci, ma devono essere sottoposte a uno speciale Direttiva Comunitaria 2012/19/UE. processo di riciclaggio. L’imballaggio deve esse- Lo smaltimento dovrà...
  • Seite 196 Digital ADAS Installation manual...
  • Seite 197 Inhoudsopgave Algemene informatie Algemene opmerkingen Identificatie Identificatie van de fabrikant Modelidentificatie Over deze handleiding Doel van de handleiding Geadresseerden Levering en bewaring Symbolen gebruikt in deze handleiding Veiligheid Algemene veiligheidswaarschuwingen Gebruikersclassificatie Beschrijving van de apparatuur Hoofdcomponenten Beoogd gebruik In ontvangst nemen en uitpakken van de apparatuur In ontvangst nemen van de apparatuur Uitpakken...
  • Seite 198 Digital ADAS Installation manual Installatie/montage Toegestane omgevingsomstandigheden Lijst met benodigde gereedschappen voor installatie De stelvoeten monteren Montage van handgrepen voor het hanteren Montage van de digitale ADAS-CPU Montage van de metrische maatstreep Montage van het digitale doel Montage van de steunbasis Montage van de spiegel 7.10 Montage van referentieplaten op de klemmen 7.11 De laserafstandsmeters monteren...
  • Seite 199: Algemene Informatie

    MAHLE Aftermarket Italy S.p.A. en de bronnen die bij de productie van deze handleiding zijn gebruikt, aanvaarden geen enkele aansprake- lijkheid die voortvloeit uit het oneigenlijk gebruik...
  • Seite 200: Identificatie

    Modelidentificatie De apparatuur is vervaardigd door: Deze handleiding geldt voor de volgende appa- ratuur: MAHLE Aftermarket Italy S.p.A. Model: Digitale ADAS Via Diesel, 10/A - 43122 Parma (Italië) Telefoon 39 0521 954411 - Fax 39 0521 954490 Op de verpakkingsdoos staat: email info.aftermarket@mahle.com...
  • Seite 201: Over Deze Handleiding

    3. Over deze handleiding Doel van de handleiding Levering en bewaring Deze handleiding beschrijft de procedures die Deze handleiding wordt geleverd in elektronische moeten worden gevolgd voor het uitpakken, formaat. installeren en in bedrijf stellen van het Digitale ADAS-systeem. Bewaar deze handleiding bij de apparatuur voor eenvoudige referentie.
  • Seite 202: Symbolen Gebruikt In Deze Handleiding

    Digital ADAS Installation manual Symbolen gebruikt in deze handleiding In deze handleiding worden symbolen gebruikt die belangrijke informatie benadrukken. De vol- gende symbolen worden gebruikt: Opgelet Symbool gebruikt om belang- rijke waarschuwingen te identifi- ceren voor de gebruiker en/of de apparatuur Verboden Symbool gebruikt voor het identificeren van acties die niet...
  • Seite 203: Veiligheid

    Installateur/onderhoudstechnicus mogen niet worden uitgevoerd door kinde- Technicus opgeleid door een erkend Contact van de apparatuur met water of MAHLE Service Center, in staat om de vloeistoffen is verboden mechanische en elektrische componenten Bij onderhoudsingrepen aan de apparatuur van de apparatuur te installeren en erop in...
  • Seite 204: Beschrijving Van De Apparatuur

    Mobiele steunstructuur mera’s en radars). De Digitale ADAS moet samen 65” digitaal doel met een scantool worden gebruikt dat geprodu- ceerd is door MAHLE Aftermarket Italy S.p.A. (zie Laserafstandsmeter handleiding van de scantool). Spiegel voor laserkalibratie Metrische maat...
  • Seite 205: In Ontvangst Nemen En Uitpakken Van De Apparatuur

    Controleer of het product geen schokken en/of schade heeft opgelopen. Er zit een schokcontroleapparaat op de doos. Als het controleapparaat rood is, volg dan de instructies op het etiket en stel MAHLE Aftermarket Italy S.p.A op de hoogte.
  • Seite 206: Uitpakken

    Digital ADAS Installation manual 1x hoes voor maatbalk (C4) Uitpakken Doos D: 2x halve stangen Benodigd gereedschap: 1x verbindingsstekker voor halve stang Schaar De verpakking verwijderen Lijst van accessoires in de dozen Plaats de pallet op de plaats die is gekozen voor installatie Doos A: 1x Digitale ADAS CPU (A1)
  • Seite 207 Doos A Doos B Doos C...
  • Seite 208: Installatie/Montage

    Digital ADAS Installation manual 7. Installatie/montage Toegestane omgeving- Lijst met benodigde somstandigheden gereedschappen voor installatie De omgeving waarin de apparatuur wordt gebruikt, is een overdekte omgeving die be- Voor de installatie van het digitale ADAS-systeem schermd is tegen weersinvloeden zoals regen, zijn de volgende gereedschappen nodig: hagel, sneeuw, mist, zwevend stof, brandbaar stof, mag geen geclassificeerde omgeving zijn...
  • Seite 209: De Stelvoeten Monteren

    De stelvoeten monteren De stelvoeten monteren Leg een karton op het werkvlak en draai de structuur op zijn kant, om In de accessoiredoos bevinden zich 4 stelvoe- gemakkelijk bij de bevestigingspunten ten, nodig voor een eventuele stabilisatie van de van de stelvoeten te kunnen structuur, in geval van een overmatige helling van het oppervlak.
  • Seite 210: Montage Van Handgrepen Voor Het Hanteren

    Digital ADAS Installation manual De handgrepen monteren Montage van handgrepen Plaats de lange schroeven met sluit- voor het hanteren ringen in de daarvoor bestemde gaten van de buis voor de handgreep, tot De structuur is voorzien van wielen en kan daar- aan de schroefgaten van de structuur om worden verplaatst door deze te duwen met Draai de schroeven vast met een 3...
  • Seite 211: Montage Van De Digitale Adas-Cpu

    Benodigd gereedschap: Montage van de digitale Kruiskopschroevendraaier ADAS-CPU De Digitale ADAS CPU maakt de communicatie tussen de Digitale ADAS en de scantool moge- lijk. Het zit in een klein doosje in de doos met accessoires, die ook het volgende bevat: 1x Digitale ADAS CPU 1x Bevestigingsbeugel 1x Handleiding...
  • Seite 212 Digital ADAS Installation manual De Digitale ADAS CPU in elkaar zetten Sluit de voeding van de DigitaleADAS CPU aan op de stekkerdoos Bevestig de steunbeugel aan de Digitale ADAS CPU, met 2 van de 4 Opmerking: de kabel is al bedraad in bijgeleverde schroeven de structuur Bevestig de Digitale ADAS CPU aan...
  • Seite 213: Montage Van De Metrische Maatstreep

    Plaats de tweede helft van de metri- Montage van de sche maat op de centreerstang en zet deze vast met de juiste schroeven metrische maatstreep Om de installatie van de metrische maat Montage van maat op de structuur te vergemakkelijken, brengt u de struc- tuur omhoog tot het maximum, met be- Plaats de 3 bevestigingsmiddelen met hulp van de speciale afstandsbediening.
  • Seite 214 Digital ADAS Installation manual Scan naar instructievideo's...
  • Seite 215: Montage Van Het Digitale Doel

    Montage van het digitale doel Montage van het digitale Open het karton door de blokkeringen doel te verwijderen Sluit het netsnoer aan op het digitale De structuur moet omhoog/omlaag worden ge- doel bracht tot een hoogte die voor de installateur gemakkelijk te bereiken is.
  • Seite 216 Digital ADAS Installation manual...
  • Seite 217: Montage Van De Steunbasis

    Plaats de meegeleverde schroeven en Montage van de steunbasis draai ze vast Opmerking: gebruik een 3 mm inbus- Benodigd gereedschap: sleutel zonder vast te draaien 3 mm inbussleutel Plaats het geribbelde tapijt Montage van de steunbasis Monteer de beschermkappen door de gaten in de basis te plaatsen in overeenstemming met de schroefga- ten in de steun...
  • Seite 218: Montage Van De Spiegel

    Digital ADAS Installation manual Montage van de spiegel Montage van de spiegel Pak de spiegel en de houder uit Benodigd gereedschap: Plaats de spiegelsteun in de basis op de metrische maat. Draai het onderste Kruiskopschroevendraaier handwiel vast 10 mm inbussleutel Plaats de spiegel op de houder kalibreringswerkzaamheden Opmerking: de spiegel moet zo...
  • Seite 220: Montage Van Referentieplaten Op De Klemmen

    Digital ADAS Installation manual 7.10 Montage van referentieplaten op de Montage van referentie- klemmen platen op de klemmen Steek de bevestigingspen van het referentiedoel in het doorlopende gat De referentiewaterpas moet altijd en schroef deze vast aan de klemmen bovenaan aan de zijkant van de Plaats de klemmen (klaar voor klemhendel zitten.
  • Seite 221: De Laserafstandsmeters Monteren

    7.11 Montage van de afstandsmeter De laserafstandsmeters Plaats de batterijen in de twee laseraf- monteren standsmeters Plaats de lasermeters in de aluminium De afstandsmeters zijn uitgerust steun, en lijn de lasermeter uit met met een oplaadbare batterij. Om de achterkant van de steun. Draai de de batterij op te laden, sluit u de bevestigingsschroef aan afstandsmeter met de speciale...
  • Seite 222: Voorbereiding Voor Digitale Adas Cpu-Toetsenbord

    Digital ADAS Installation manual 7.12 Voorbereiding voor Digitale ADAS CPU-toetsenbord Voorbereiding voor Digitale ADAS CPU- -toetsenbord Verwijder het Bluetooth-apparaat van het toetsenbord en sluit het aan op de Digitale ADAS CPU Voeg de USB-kabel voor het opladen van de interne batterij van het toet- senbord toe aan de PC Zet de schakelaar van het toetsen- bord in de positie "Aan”...
  • Seite 223: Eerste Inbedrijfstelling Van De Apparatuur

    8. Eerste inbedrijfstelling van de apparatuur Schakel het digitale doel in met de Eerste inbedrijfstelling en juiste afstandsbediening configuratie van het digita- Selecteer de gewenste taal en land le doel Opmerking: sla de verbinding van het digitale doelwit met internet over De eerste inbedrijfstelling/configu- Bekijk en accepteer de licentieover- ratie van het Digitale ADAS-sys-...
  • Seite 224: Aansluiting En Update Van De Digitale Adas Cpu

    Digital ADAS Installation manual Aansluiting en update van Digitale ADAS CPU-confi- de digitale ADAS CPU guratie via scantool Het is noodzakelijk om de Digitale ADAS CPU te Aansluiting en update van de digitale configureren door de referentiegegevens van de ADAS CPU Digitale ADAS in de scantool in te voeren.
  • Seite 225 De software wordt weergegeven op Digitale ADAS CPU-configuratie via scantool het digitale doel en het systeem is klaar om te werken. De configuratie Neem de scantool is voltooid. De aanwezigheid van de driehoek in het midden van het Open de menupagina Digital ADAS- digitale doel geeft aan wat eerder is -instellingen op het scantool geschreven.
  • Seite 226 Digital ADAS Installation manual...
  • Seite 227: Verwijdering

    9. Verwijdering Apparatuur afdanken Verwijdering van de verpakking Het product voldoet aan de vereis- ten van de communautaire richtlijn Elektrische en elektronische apparatuur mag 2012/19/EC. Verwijdering dient te nooit worden afgevoerd als huishoudelijk afval, geschieden in overeenstemming maar moet een speciaal recyclingproces onder- met de plaatselijke voorschriften gaan.
  • Seite 228 Digital ADAS Instrukcja instalacji...
  • Seite 229 Indeks Informacje ogólne Uwagi ogólne Identyfikacja Oznaczenie producenta Identyfikator modelu Informacje o instrukcji Cel instrukcji Odbiorcy Dostawa i przechowywanie Symbole zastosowane w treści niniejszej instrukcji Bezpieczeństwo Ogólne ostrzeżenia związane z bezpieczeństwem Klasyfikacja operatorów Opis sprzętu Główne komponenty Zastosowanie Odbiór sprzętu Odbiór sprzętu Rozpakowanie...
  • Seite 230 Digital ADAS Instrukcja instalacji Instalacja / Montaż Dozwolone uwarunkowania środowiskowe Lista narzędzi wymaganych do przeprowadzenia instalacji Montaż stopek Montaż uchwytów transportowych Zespół Digital ADAS CPU Mocowanie pręta metrycznego Zespół tarcz cyfrowych Zespół podstawy nośnej Zespół lusterek 7.10 Montaż płytek referencyjnych na zaciskach 7.11 Montaż...
  • Seite 231: Informacje Ogólne

    Druk dozwolony jest wyłącznie na potrzeby użyt- w niniejszej instrukcji kowników i operatorów urządzeń, dla których przeznaczona jest niniejsza instrukcja. MAHLE Aftermarket Italy S.p.A. oraz osoby za- angażowane w opracowanie niniejszej instrukcji nie ponoszą żadnej odpowiedzialności wynikają- cej z niewłaściwego zastosowania zarówno in- strukcji, jak i sprzętu, gwarantując, że informacje...
  • Seite 232: Identyfikacja

    Oznaczenie producenta Identyfikator modelu Urządzenia są produkowane przez: Urządzenia, opisane w treści niniejszej instrukcji MAHLE Aftermarket Italy S.p.A. Model: Digital ADAS Via Diesel, 10/A - 43122 Parma, (Włochy) Tel. 39 0521 954411 - Faks 39 0521 954490 Opakowanie kartonowe zawiera: email info.aftermarket@mahle.com...
  • Seite 233: Informacje O Instrukcji

    3. Informacje o instrukcji Cel instrukcji Dostawa i przechowywanie Niniejsza instrukcja opisuje procedury, które na- Niniejsza instrukcja zostaje dostarczona w for- leży przeprowadzić podczas rozpakowywania, mie elektronicznej. instalacji i wstępnej konfiguracji systemu Digital ADAS. Niniejszą instrukcję należy zawsze przechowy- wać wraz z urządzeniem. W przypadku wątpliwości dotyczących prawi- dłowej interpretacji treści instrukcji należy skon- Niniejsza instrukcja opisuje również...
  • Seite 234: Symbole Zastosowane W Treści Niniejszej Instrukcji

    Digital ADAS Instrukcja instalacji Symbole zastosowane w treści niniejszej instrukcji Symbole zastosowano w celu podkreślenia klu- czowych informacji. Wykorzystano następujące symbole: Ostrożnie Symbol stosowany do identy- fikacji ważnych ostrzeżeń dla operatora i/lub bezpieczeństwa sprzętu Zakaz Symbol stosowany do identyfi- kacji operacji, których nie wolno wykonywać...
  • Seite 235: Bezpieczeństwo

    Sprzęt należy zawsze umieszczać i używać Stosować wyłącznie oryginalne wyposaże- na suchej, stabilnej, równej i poziomej po- nie dystrybuowane przez MAHLE wierzchni Niniejszego urządzenia nie mogą użyt- Zawsze odłączać urządzenie po zakoń- kować dzieci ani osoby o ograniczonych czeniu jego użytkowania oraz przed roz-...
  • Seite 236: Opis Sprzętu

    Ruchoma struktura wsporcza takich jak kamery i radary. Digital ADAS należy Tarcza cyfrowa 65" stosować wraz z urządzeniem skanującym produ- kowanym przez MAHLE Aftermarket Italy S.p.A. Dalmierz laserowy (zob. instrukcja obsługi urządzenia skanującego). Lustro do kalibracji lasera Pręt metryczny Digital ADAS CPU z klawiaturą...
  • Seite 237: Odbiór Sprzętu

    Sprawdzić, czy produkt nie doznał wstrzą- sów i/lub uszkodzeń. Na kartonie znajduje się urządzenie do kontroli drgań. Jeśli na urządzeniu kontrolnym świeci się czerwona dioda wówczas należy postępować zgodnie z instrukcjami podanymi na etykiecie i powiadomić MAHLE Aftermarket Italy S.p.A.
  • Seite 238: Rozpakowanie

    Digital ADAS Instrukcja instalacji Skrzynia D: 2x pręty połówkowe Rozpakowanie 1x wtyczka łączeniowa pręta połówkowego Niezbędne narzędzia: Demontaż opakowania Nożyce Umieścić paletę w miejscu przezna- czonym do montażu Wykaz wyposażenia w skrzyniach Otworzyć pudełko i wyjąć karton z Skrzynia A: opakowaniem 1 Digital ADAS CPU (A1) Przyciąć...
  • Seite 239 Skrzynia A Skrzynia B Skrzynia C...
  • Seite 240: Instalacja / Montaż

    Digital ADAS Instrukcja instalacji 7. Instalacja / Montaż Dozwolone uwarunkowa- Lista narzędzi wymaga- nia środowiskowe nych do przeprowadzenia instalacji Środowisko, w którym urządzenie znajduje za- stosowanie jest środowiskiem wewnętrznym, Do instalacji systemu Digital ADAS potrzebne są chronionym przed czynnikami atmosferycznymi, następujące narzędzia: takimi jak deszcz, grad, śnieg, mgła, pył...
  • Seite 241: Montaż Stopek

    Mocowanie stopek Montaż stopek Ułożyć karton na powierzchni robo- czej i odwrócić strukturę na bok, aby Wewnątrz skrzynki na akcesoria znajdują się 4 uzyskać łatwy dostęp do punktów stopki, niezbędne do ewentualnej stabilizacji mocowania stopek konstrukcji, w przypadku nadmiernego pochyle- nia powierzchni.
  • Seite 242: Montaż Uchwytów Transportowych

    Digital ADAS Instrukcja instalacji Montaż uchwytów Montaż uchwytów Wsunąć długie śruby z podkładka- transportowych mi do odpowiednich otworów rurki uchwytu, aż do przejścia do gwinto- Konstrukcja wyposażona jest w kółka, dzięki wanych otworów konstrukcji czemu można ją przemieszczać popychając z Dokręcić...
  • Seite 243: Zespół Digital Adas Cpu

    Niezbędne narzędzia: Zespół Digital ADAS CPU Śrubokręt z łbem z gniazdkiem krzyżowym Digital ADAS CPU umożliwia komunikację po- między Digital ADAS oraz narzędziem skanują- cym. Znajduje się on w małym pudełku wewnątrz skrzyni z wyposażeniem, które zawiera również: 1 Digital ADAS CPU 1 Wspornik mocujący 1 Instrukcję...
  • Seite 244 Digital ADAS Instrukcja instalacji Montaż jednostki centralnej cyfrowego Podłączyć zasilanie Digital ADAS CPU do gniazda wtykowego systemu ADAS Przymocować wspornik do Digital Uwaga: do kabla zostały już do- ADAS CPU, wykorzystując 2 z 4 prowadzone przewody w obrębie dostarczonych śrub struktury Przymocować...
  • Seite 245: Mocowanie Pręta Metrycznego

    Umieścić pręt centrujący w drugiej Mocowanie pręta metrycznego połowie pręta metrycznego i zamoco- wać go odpowiednimi śrubami Aby ułatwić montaż pręta metryczne- go, należy unieść strukturę do mak- Montaż prętów na konstrukcji symalnego poziomu wykorzystując do tego celu urządzenie sterownicze Umieścić...
  • Seite 246 Digital ADAS Instrukcja instalacji Wyszukaj samouczki wideo...
  • Seite 247: Zespół Tarcz Cyfrowych

    Zespół tarcz cyfrowych Zespół tarcz cyfrowych Otworzyć karton i wyjąć bloczki Konstrukcję należy podnieść/obniżyć na poziom Podłączyć przewód zasilający do ułatwiający obsługę. Cyfrowa tarcza jest już wy- tarczy cyfrowej posażona w pręty wsporcze. Umieścić pręty pionowe na szynie nośnej pomiędzy zębami specjalnymi Przed przystąpieniem do monta- żu należy upewnić...
  • Seite 248 Digital ADAS Instrukcja instalacji...
  • Seite 249: Zespół Podstawy Nośnej

    Wsunąć dostarczone śruby a następ- Zespół podstawy nośnej nie je dokręcić Wskazówka: stosować klucz imbu- Niezbędne narzędzia: sowy 3 mm; nie dokręcać Klucz imbusowy 3 mm Ułożyć wykładzinę użebrowaną Zespół podstawy nośnej Zmontować osłony, ustawiając otwory w podstawie analogicznie do gwinto- wanych otworów we wsporniku...
  • Seite 250: Zespół Lusterek

    Digital ADAS Instrukcja instalacji Zespół lusterek Zespół lusterek Rozpakować lustro wraz z uchwytem Niezbędne narzędzia: Umieścić wspornik lustra w podsta- wie na pręcie metrycznym. Dokręcić Śrubokręt z łbem z gniazdkiem krzyżowym pokrętło dolne Klucz imbusowy 10 mm Umieścić lustro na uchwycie W przypadku kalibracji, w których Uwaga: lustro należy ustawić...
  • Seite 252: Montaż Płytek Referencyjnych Na Zaciskach

    Digital ADAS Instrukcja instalacji 7.10 Montaż płytek referencyjnych na zaci- Montaż płytek referencyj- skach nych na zaciskach Wsunąć trzpień mocujący tarczy referencyjnej w otwór przelotowy i Pęcherzyk referencyjny musi za- przykręcić go do zacisków wsze znajdować się u góry, po Umieścić...
  • Seite 253: Montaż Dalmierzy Laserowych

    7.11 Montaż dalmierza Montaż dalmierzy laserowych Włożyć baterie do obydwóch dalmie- rzy laserowych Dalmierze wyposażone są w aku- mulator. Aby naładować akumula- Ustawić mierniki laserowe na wspor- tor, należy podłączyć dalmierz za niku aluminiowym, wyrównując je pomocą specjalnego kabla dostar- względem tylnej części wspornika.
  • Seite 254: Przygotowanie Klawiatury Digital Adas Cpu

    Digital ADAS Instrukcja instalacji 7.12 Przygotowanie klawiatury Digital ADAS CPU Przygotowanie klawiatury Digital ADAS Odłączyć urządzenie Bluetooth od klawiatury i podłączyć je do Digital ADAS CPU Dodać do komputera kabel USB do ładowania wewnętrznego akumulato- ra klawiatury Ustawić przełącznik klawiatury w pozycji "ON"...
  • Seite 255: Pierwsze Uruchomienie Urządzenia

    8. Pierwsze uruchomienie urządzenia W razie potrzeby dokonać wyboru Pierwsze uruchomienie i żądanego języka i kraju konfiguracja tarczy cyfrowej Wskazówka: pominąć połączenie tarczy cyfrowej z Internetem Pierwsze uruchomienie / konfigu- Dokonać przeglądu i zaakceptować racja Digital ADAS jest zawsze wy- umowę...
  • Seite 256: Podłączanie I Aktualizacja Digital Adas Cpu

    Digital ADAS Instrukcja instalacji Podłączanie i aktualizacja Cyfrowa konfiguracja pro- Digital ADAS CPU cesora ADAS przy użyciu narzędzia skanującego Podłączanie i aktualizacja Digital ADAS Konieczne jest skonfigurowanie Digital ADAS CPU poprzez wprowadzenie danych referencyj- Korzystając z klawiatury Digital ADAS nych Digital ADAS do programu narzędzia ska- CPU, wybrać...
  • Seite 257 Oprogramowanie jest wyświetlane na Cyfrowa konfiguracja procesora ADAS przy użyciu narzędzia skanującego tarczy cyfrowej a system jest gotowy do pracy. Konfiguracja została zakoń- Pobrać narzędzie skanujące czona. Obecność trójkąta w centrum cyfrowej tarczy wskazuje, co zostało Otworzyć stronę menu ustawień Digi- napisane wcześniej.
  • Seite 258 Digital ADAS Instrukcja instalacji...
  • Seite 259: Usuwanie

    9. Usuwanie Utylizacja sprzętu Utylizacja opakowania Produkt jest zgodny z wymagania- Sprzętu elektrycznego i elektronicznego w żad- Dyrektywy Wspólnotowej nym przypadku nie wolno usuwać razem z odpa- 2012/19/WE. Usuwanie produktu dami domowymi; należy go poddawać specjali- należy przeprowadzać zgodnie z stycznemu procesowi recyklingu.
  • Seite 260 Note...
  • Seite 261 Note...
  • Seite 262 MAHLE Aftermarket Italy S.P.A. Via Rudolf Diesel 10/a 43122 Parma Italia Tel. +39 0521 9544-11 Fax +39 0521 9544-90 info.aftermarket@mahle.com MAHLE Aftermarket Deutschland GmbH Dürrheimer Straße 49a D-78166 Donaueschingen Germania Tel. +49 771 89653-24200 Fax +49 771 89653-24290 mss.sales.de@mahle.com MAHLE Aftermarket S.L.U.

Inhaltsverzeichnis