Start-Up; Cleaning And Maintenance; Cleaning; Maintenance - Parkside PFR 28 A1 Originalbetriebsanleitung

To release
- Release the retainer nut of adapter
(2) on the adapter (1).
- Loosen retainer nut (3) on the ex-
tension element (4).
- Release the catches by pushing
and turning through 90° in the op-
posite direction (Bayonet catch).

Start-up

Take heed of the backstroke gen-
erated by the jet of water. Stand
firmly and hold the jet gun tightly.
You may otherwise injure yourself
or others.
• Do not release water from the pressure
washer until the patio cleaner rests on
the surface you are cleaning.
• Always hold the patio cleaner by the
handle (5) when washing down walls.
• Avoid the patio cleaner going over
free corners.
• The patio cleaner is not designed for
scouring out or scrubbing.
Pressure control
• You can adjust the pressure of
the escaping water jet by turning
the pressure regulator (9). Accor-
dingly, the rotation speed of the
nozzles changed
• Increase the pressure by turning
the pressure regulator (9) in a
clockwise direction. Reduce the
pressure by turning the screw
counterclockwise connnections.
Cleaning and

Maintenance

Cleaning

Always keep the washer clean. Do
not use any detergents or solvents.
• Only clean the pressure washer with a
soft brush or a slightly moist cloth.
Maintenance
The patio cleaner is maintenance-free.
Ask our service centre to carry out
any work that is not described in
these instructions. Use only original
parts.

Storage

• Store the patio cleaner in a frost-free
room.
Waste Disposal
and Environmental
Protection
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have finished with them.
Electric appliances should not be dis-
posed of in the domestic garbage.
Hand the tool in at a recycling centre. The
plastics and metal parts can be separated
and recycled. Ask your Service Center about
this.
Defective units returned to us will be dis-
posed of for free.
GB CY
7