Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Change-Over probe T2
Code 9025310
Only on the fan coil units designed for two-pipe
systems, the heating/cooling changeover can be
performed automatically by installing, on the water
pipe supplying the coil, the Change Over probe T2
(optional).
The probe must be placed upstream the 3 way valves
Based on the temperature measured by the probe,
the unit will switch to heating or cooling operation.
If using probe T2 in installations with Master and
Slave units, probe T2 must be fitted on all the
appliances.
A = Water pipe
B = Probe
C = Anti-condensation insulation
A
A = Cooling
B = Fan only
C = Heating
Type: NTC 10K Ohm (25 °C = 10000 Ohm)
Probe length 1800 mm.
58
B
C
Werbung
Inhaltsverzeichnis
