Important Emc Notices For Use In Medical Environments - Sony LMD-2451MT Bedienungsanleitung

Important EMC notices for use in medical environments

• The LMD-2451MT needs special precautions regarding EMC and needs to be installed and put into service according
to the EMC information provided in the instructions for use.
• The LMD-2451MT is intended for use in a professional healthcare facility environment.
• Portable and mobile RF communications equipment, such as cellular phones, can affect the LMD-2451MT.
Warning
• Portable RF communications equipment should be used no closer than 30 cm (12 inches) to any part of the
LMD-2451MT. Otherwise, degradation of the performance of this equipment could result.
• If the LMD-2451MT will be used adjacent to or stacked with other equipment, normal operation of the LMD-2451MT
under such configurations should be verified via observation.
• The use of accessories and cables other than those specified, with the exception of replacement parts sold by Sony
Corporation, may result in increased emissions or decreased immunity of the LMD-2451MT.
Guidance and manufacturer's declaration – electromagnetic emissions
The LMD-2451MT is intended for use in the electromagnetic environment specified below. The customer or the user of
the LMD-2451MT should assure that it is used in such an environment.
Emission test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
4
GB
Compliance
The LMD-2451MT uses RF energy only for its internal
function. Therefore, its RF emissions are very low and are
Group 1
not likely to cause any interference in nearby electronic
equipment.
The LMD-2451MT is suitable for use in all
Class B establishments, including domestic establishments and
those directly connected to the public low-voltage power
supply network that supplies buildings used for domestic
purposes.
Class D
Complies
Electromagnetic environment – guidance