Herunterladen Inhalt Inhalt Diese Seite drucken

Description; Purpose; Product Overview; Safety - GreenWorks STF456 Bedienungshandbuch

Vorschau ausblenden Andere Handbücher für STF456:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 14
EN
1

DESCRIPTION

1.1

PURPOSE

This machine is used to cut grass, light weeds, and
other similar vegetation at or around ground level. The
cutting plane must be approximately parallel to the
ground surface. You cannot use the machine to cut or
chop hedges, shrubs, bushes, flowers and compost.
1.2

PRODUCT OVERVIEW

Figure 1-22 .
Battery slot
1
Rear handle
2
Lock-out button
3
Speed button
4
On/off button
5
Trigger
6
Carrying ring
7
Auxiliary handle
8
Upper shaft
9
Coupler
10
Lower shaft
11
Guard
12
Cutting blade
13
Trimmer head
14
Cut-off blade
15
Guard cap
16
Release button
17
Positioning hole
18
Knob
19
Lower clamp
20
Battery release button
21
Spool cover
22
Spool
23
Bump knob
24
Spool cover line slot
25
Slot
26
Line slot
27
Trimmer head tool
28
Inner cup
29
Plate
30
Outer cup
31
Nut
32
Direction of rotation
A
Best cutting area
B
Dangerous cutting area
C
English
2

SAFETY

Make sure that you follow all safety instructions.
Refer to Safety Manual.
3

INSTALLATION

Remove the battery pack from the machine before
installation.
Do not use accessories that are not recommended for
this machine.
3.1

UNPACK THE MACHINE

Make sure that you correctly assemble the machine
before use.
If parts of the machine are damaged, do not use
the machine.
If parts are missing, do not operate the machine.
If parts are damaged or missing, contact the
service center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance
with local regulations.
For your personal safety, do not insert battery before
the tool is assembled completely.
3.2

ATTACH THE GUARD

Figure 2.
Do not touch the cut-off blade.
1. Remove the screws from the trimmer head with a
Phillips screwdriver (not provided).
2. Put the guard onto the trimmer head.
3. Align the screw holes on the guard with the screw
holes on the trimmer head.
4
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Gd40bc2100207

Inhaltsverzeichnis