Bmi - Soehnle Professional 3800 Gebrauchsanweisung

9. Application programmes

9.5 BMI

44
After setting the test weight value, confirm with the SEND key,
The scale moves to pos. 24.
Press the zeroing key. UCAL 1 is shown in the display.
Press the tare button 5 times, UCAL6 is displayed.
Go to UCAL6 with the Send key.
Backward strokes to pos. 9.
Use the Send key to go to the input field for the print image selection.
Count up to 6 (GLP printout).
After setting, accept with the Send button, scale goes to Pos. 10.
Press the zeroing key, UCAL6 is shown in the display.
To exit the setting mode, first press and hold the SEND and then the zeroing
keys together. The test weight setting is saved and the terminal switches back
to weighing mode.
Place the test weight on the scale and confirm with the SEND key.
The predefined GLP protocol is output via the print interface.
In setting mode, „BMI" must be selected for the assignment of the function
button! For setting function button see chapter 8.1 or user mode 3800/3810
(see separate description Terminal 3800: 470.702.136, Terminal 3810:
470.702.134) UCAL 4 pos. 02 =value 3.
Load the scale - the weight value is displayed.
Press the function button. The display shows the set body height. The factory
setting is 170 cm (H 170 cm).
You can change the body height by pressing the function button or the tare
button. When the button is pressed, the value changes in 10 cm steps.
Confirm the entry with the Send button. The display switches between the
weight and BMI value (display: BMI) Example: 82.8 kg --> BMI 26.2
With the function button the set body height can be changed again.
again.
To exit the BMI function, unload the scale.