Basic Function; Switch On; Zeros; Taring - Soehnle Professional 3800 Gebrauchsanweisung

7. Basic functions

7.1 Switch on

With the scale unloaded, press the On/Off button.
During the test routine, the version status is displayed briefly and then the
display switches to zero.
The scale is ready for weighing.
Place the sample on the scale. The gross weight appears in the display.

7.2 Zeros

Press the zeroing button to correct small deviations from zero, e.g. due to
soiling of the scale.
Zeroing range: 100% of the weighing range.

7.3 Taring

Manual tare
Place the extra weight on the weighing platform and then press the tare button.
Manual tare input
With the manual tare input you can enter a fixed tare value manually. To do this,
however, this function must be assigned to the function button (see Chapter
8.1).
Press the function button.
Set the desired tare weight with the tare or function button. Press briefly to
cycle the value up/down one at a time. With permanent pressure, the display
runs up or down faster.
The set value can be finally accepted by pressing the SEND button.
Delete tare
Press the zeroing key and tare is deleted.
Tare info
Press and hold the zeroing key to display the tare info.
Pressing briefly deletes the tare weight; pressing and holding until the weight
display flashes does not delete the tare weight.
7
37