Various Functions; Auto Mode - Hitachi RC-AGS1EA0E Bedienungsanleitung

Various Functions

■
Auto Restart Control
If there is a power failure, operation will be automatically restarted when the power is resumed with previous
●
operation mode and airflow direction.
(As the operation is not stopped by remote controller.)
If you intend not to continue the operation when the power is resumed, switch off the power supply.
●
When you switch on the circuit breaker, the operation will be automatically restarted with previous operation
mode and airflow direction.
Note: 1. If you do not require Auto Restart Control, please consult your sales agent.
2. Auto Restart Control is not available when Timer set.

Auto Mode

The device will automatically determine the mode of operation, Heat Mode or Cool Mode depending on the
current room temperature. The selected mode of operation will change when the room temperature varies.
Press the Mode Selector Button so that the display indicates
the (Auto) mode of operation.
When Auto has been selected, the device will automatically
●
determine the mode of operation, Heat or Cool depending
1
on the current room temperature.
If the mode automatically selected by the unit is not
●
satisfactory, manually change the mode setting (Heat, Dry,
Cool or Fan).
Set the desired Fan Speed with the
(the display indicates the setting).
2
Auto
(
(Super High)
Set the desired room temperature with the Temperature buttons
(the display indicates the setting).
3
The temperature setting and the actual room temperature may
vary depending on conditions.
Temperature range can be set between 16.0°C and 32.0°C.
Press the
START
Operation starts with a beep.
STOP
Press the button again to stop operation.
■
As the settings are stored in the memory of the remote controller,
you only have to press the
Press the (Fan Speed) button to select Auto, Silent, Low,
Medium, High or Super High.
- 4 -
(Fan Speed) button
) (Silent)
(High)
(On/Off) button.
(On/Off) button next time.
(Low)
(Medium)