Timer Reservation - Hitachi RC-AGS1EA0E Bedienungsanleitung

Timer Reservation

During the Timer Setting, if you do not press the Temperature Up/Down key within 10 seconds then it will
●
come out of the Timer Setting without any changes in Timer Settings and will display with or
Icon will be stable appear on LCD to indicate Timer Setting if set previously.
During Timer setting mode, if you press any key then it will come out immediately from timer setting.
●
Timer ON and Timer OFF can be set simultaneously.
●
When both timer set simultaneously then
●
first.
During Timer ON or Timer OFF set then Clock setting can not be changed. Clock time will not be display on
●
LCD screen.
Clock time can be seen on LCD screen by Press and Hold Timer ON or Timer OFF key for 5 seconds. Clock
●
time display for 10 seconds then it will change to Timer ON or Timer OFF time value.
1. Off Time Setting
The device can be set to turn off at a preset time.
Press ( Timer OFF) Button to select OFF timer.
Symbol start blinking and 12:00 or Previously set time will
be display on LCD screen.
Set up desire Turn off time by pressing Temperature Up /Down
1
button .
After setting , point the remote controller towards the indoor unit
and Press button.
Symbol stop blinking and turn off time will be display on
LCD screen.
A beep sound emitted from Indoor unit and Timer LED on the
indoor unit lights up.
Remote controller will go to OFF mode after turn off time elapse.
By pressing On Timer and Off Timer Button together for 3
seconds, Off Timer can be canceled.
2. On Time Setting
Indoor unit can be set to turn on at a preset time.
Press ( Timer ON) Button to select ON timer.
Symbol start blinking and 12:00 or Previously set time will
be display on LCD screen.
Set up desire Turn on time by pressing Temperature Up / Down
2
button .
After setting , point the remote controller towards the indoor unit
and Press button.
Symbol stop blinking and turn on time will be display on
LCD screen.
A beep sound emitted from Indoor unit and Timer LED on the
indoor unit lights up.
Remote controller will go to ON mode after ON timer elapse.
By pressing On Timer and Off Timer Button together for 3
seconds, On Timer can be canceled.
on LCD appear with Timer which will going to execute/expire
- 20 -